vederstein
Must do dumb things....
- Joined
- Feb 26, 2011
- Messages
- 917
- Reaction score
- 744
Now that my first time adventures in casting my own steam engine components is coming to a conclusion, I have several 3D printed casting patterns.
Quite honestly it's not an insignificant amount of money just in PLA plastic. So I'm just looking to recoup some of the money I've spent on this project.
The patterns you get (reference the picture below, top left to bottom right):
I'll also throw in a PDF set of drawings and the CAD model in STP format through email.
This is a very small market and I don't know what this stuff would usually go for, so I'm going to do this auction style.
US Domestic minimum bid of $75 US. International minimum bid $100 US.
Picture of the partially completed engine:
Please post questions here.
Thanks,
...Ved.
Quite honestly it's not an insignificant amount of money just in PLA plastic. So I'm just looking to recoup some of the money I've spent on this project.
The patterns you get (reference the picture below, top left to bottom right):
- Three spoke 6.5" flywheel
- Six spoke 6.5" flywheel
- Cylinder with core
- Cylinder without core
- Cylinder Head
- Three Posts
- Crankshaft Bearing
- Core mold for above cylinder pattern
- Base
I'll also throw in a PDF set of drawings and the CAD model in STP format through email.
This is a very small market and I don't know what this stuff would usually go for, so I'm going to do this auction style.
US Domestic minimum bid of $75 US. International minimum bid $100 US.
Picture of the partially completed engine:
Please post questions here.
Thanks,
...Ved.
