Jan Ridders
Well-Known Member
- Joined
- Apr 21, 2008
- Messages
- 52
- Reaction score
- 94
Hi all,
Recently I designed and made a flame eater with glass cylinder, graphite piston and internal valve and a driving system with Neodymium magnets. Because glass and graphite are not corrodated by the hot and wet spirits flame this flame eater doesnot pollute at all so it needs no maintenance at all. The engine is running very nice and reliable.
You can read and see all about it on my web site; page:
http://ridders.nu/Webpaginas/pagina_happer_inw_schuif_glas/inw_schuif_glas_frameset.htm
Below a CAD picture with explanations (if I did this well)
Friendly greetings from Holland,
Jan Ridders
Below the video:
[ame]http://www.youtube.com/watch?v=opj-V14O_2w&list=UUOWqwLEIfORZB09qQirdkag&index=3&feature=plcp[/ame]
Recently I designed and made a flame eater with glass cylinder, graphite piston and internal valve and a driving system with Neodymium magnets. Because glass and graphite are not corrodated by the hot and wet spirits flame this flame eater doesnot pollute at all so it needs no maintenance at all. The engine is running very nice and reliable.
You can read and see all about it on my web site; page:
http://ridders.nu/Webpaginas/pagina_happer_inw_schuif_glas/inw_schuif_glas_frameset.htm
Below a CAD picture with explanations (if I did this well)
Friendly greetings from Holland,
Jan Ridders
Below the video:
[ame]http://www.youtube.com/watch?v=opj-V14O_2w&list=UUOWqwLEIfORZB09qQirdkag&index=3&feature=plcp[/ame]
Last edited:
