First engine

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
mcr, that is a very nice engine. Your have every reason to be a proud builder. So how long is the launch? I'm guessing 5 feet. Very nice work and thanks for showing the video.
Mel
 
Not far off Mel 50" progress to date:
Wide-a-Wake005.jpg

Lapstrack planking
 

I have had a rather unpleasant experience with Ebay, when I had a close look at the boiler I purchased for the boat it turned out to be soft soldered and then sprayed to cover up the fact.
I had little choice but to cut it up and use the copper to make a new boiler.
With lots of help from a fellow club mate this is the result so far.

boiler construct 004.jpg


clinker 030.jpg
 
mcr,

Beautiful work. :bow: :bow:

Commiserations on your boiler buy but it looks like a great recovery. :bow:

Best Regards
Bob
 
A little more progess after the boiler set back.

boiler construct 006.jpg


boiler construct 008.jpg
 

Latest posts

Back
Top