Elmer's Comber Rotary Engine

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

BoCam

New Member
Joined
Oct 21, 2018
Messages
4
Reaction score
0
Location
Costa Mesa, CA, USA
This is my first running steam engine!
Elmer's Comber Rotary Engine. Built according to the plans without changes. (as much as I can manage ;))
I have no background in machining so I'm still learning as I go. I used an old Harbor Freight Mill/Lathe combo tool I purchased with the help of a friend a while ago.

Below is a video of it running. I can't say exactly what air pressure it was running on since the gauge on my air compressor starts reading at around 10 or 15 psi and I ran it up to a max of about 30 psi (I think).



Thanks for your interest.
Bob
 
Back
Top