Duclos Fire Eater - my first engine

[David Morrow]

This is my first engine but it sure looks like I got addicted early. I've made some cosmetic changes and pimped it up a bit. I made the base look like brick and when I'm done I made anodize or paint it read and fill in the lines to look like mortar.

http://www.ldrider.ca/cnc/fire-eater/fire-eater-1.htm

 

[ChooChooMike]

:bow: :bow: :bow: :bow: :bow: :bow: :bow: :bow: :bow:

Looks pretty sweeeeeeeeeeet this far !! Looks like you're about 2/3rd's+ done ??

How about some pictures of your Sherline setup and maybe vid's of the parts in progress while being cut !!

Mike

 

[David Morrow]

I'd say 2/3's is about right. I do have to go back and fine tune a few things and figure out a colour scheme. Just enough colour to make it interesting but still show some polished aluminum & brass.

Sorry, no video camera. When the CNC is running it's mostly just noise and spray. There's a link on the top of the page to my CNC project home and you will see the mill there. There's not much Sherline left now.

 

[Brass_Machine]

Hot damn thats looking good!

Eric

Edit: checked out your site. I see you are a bike nut as well. Cool. Me too.

 

[Brass_Machine]

The clock is pretty cool too!

Eric