Dual Hypercube Evolution Build

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

bruedney

Well-Known Member
Joined
Nov 15, 2014
Messages
91
Reaction score
21
Location
Wellington, New Zealand
So James (Joco) and I are embarking on a new project

The building of a Hypercube Evolution coreXY 3D printer each
4GN_TKvc-6KWL8VbCrpLJG6gOx21tvzD1qiS1bjy0-2SZHXiYXoLCeAibhAP9XYeOT9GPxPvB3Mnh0YR46OiSHuyDtJRw0sglrWvVmco54OPwpp9H52x3IxHyrI7vZCaRIsbpCDHSc0RAiqkbmhqP1mfgUDXWjM6THSChghadgzUDRvpt8B6CJfycSPxYX36505W9gXuPONLNfk_gXFu9hi-Gkvd_SceZp-tDjAlhP343xB3QTIVZBJGMW4kTd9pvhQ-6fxn0EH57ASx28OZMlagfkJi7OdDI0P27hA6eC_J94DdS2hcySZe45n7exobH93858WHosr_9Hy1iCkttrQkUE6SmxAJnN6BRf5fdajrQ6Drv9gcikaV8bSZCiLVFSh3bNY-0W9kduc3vCrLl7TRr7bKjW_DaLLkbM0g6ghCw-J-mJE34aBwnZayNM-b1jN59tS4gIZS-UciFeMvwtMI-2mESBTy1XkMXZVbNESthWuXDs20nr4O1qZVfyNtfivR3ohGuK6yIy6XP1igWCPslprqCocJ4uEpTxSOzTQnyodqXOzV0VwNOzBUbHrsc0NlDoNTld8lA9pmc7QwBTLf6ewSOANl1PaA9XV6J4vY8wkiI8gR9_4m=w628-h472-no


Because we have engineering machines already we have decided to build some parts rather than buy them in from overseas.

The last two nights for me have been spent make the Hotends based on the E3D hotend design E3D online

5bOewhQqArcP2CnbIdLbDKoSLBSZt4yozdfkzk_SGxkFBpjsK8eweh_J9yzWpDnd-Mt6UDkabtZuPABmupuP17O9a_LSI-AQ_Arp-E3dTBmeZ5y4oqdmjI2Am9b2WM_QkkZPd5NZ5dz1TAk0A_4L5I2WumSqbGDXZz7QwLrKJbUrz0IB_RVdgflcGX-xs1er9gFOf1cDY808MIziobyVGitA014Mi_QcLhHuZ-woVlxTPqGHgAFJZc1T_GqoxGfgxiunqzaKO9NFhqXWszAZr-n606WUAtfxA4tbs-vh0SBTPRRvzU2CGwA0V7Dni2aAz03wkmfSaqw5gvp5OwVlSWJCrK9_o1LVVbEl6spBgtm736hooCYjQ9ibpwJM7IvtmEcqFPUCjkqIBTQirXO63GMINoPZoIGCNiO05-vIifz8Pd0_xPAqHxAGQA3SWajrfRmDfmEv35PxgK3dyesdQi27CLcG7d4H7xRkW0pmoCJmZN7VeX8-txue3WNcEMl2W54NgmLp4-V0NAKxqNNRFoyzWqzzk113LmOjfB-wUUvfLYIFDoFbjoK7MFlXZ-lagmU3XO08bBo_w3xsePys4bgYWNr9G42zWTZumL3B24hLcvNnF_prGtO_=w800-h600-no


These things are quite small (16mm x 23mm x 11.5mm)

Hopefully this might be of interest to others on this site.

Cheers

Bruce
 
Last edited:
And I've been busy printing parts with my old reprap mendel.

0B8cd8JUyxJr9cVdCcndrOXExV0k=w1435-h793-iv1
 
Hello Bruce,
Your project is very interesting for me. I use a makerbot printer and would rather have a larger plattfrom.
Greetings Manfred
 
And I've been busy printing parts with my old reprap mendel.

0B8cd8JUyxJr9cVdCcndrOXExV0k=w1436-h816-iv1

James

Did you take that photo (that isn't appearing) on your phone? There is some phaffing about you have to do to get it to show from Google Photos (can't remember what that phaffing is at the mo)

Bruce
 
James

Did you take that photo (that isn't appearing) on your phone? There is some phaffing about you have to do to get it to show from Google Photos (can't remember what that phaffing is at the mo)

Bruce

Something screwed up. Will look at it again when get home and edit things. Still coming to grips with this google photos/drive thing for sharing images on sites.

edit: Fixed .... I hope.
 
These things are quite small (16mm x 23mm x 11.5mm)

Hopefully this might be of interest to others on this site.

Cheers

Bruce

Bruce,
I looked at making a few of these but when I found them on the shelf in the UK for £2 each I bought them in, I'm making my own stainless throats though as M6 threaded rod is well priced at the local Screwfix ;-)

- Nick
 

Latest posts

Back
Top