DIN Plugs and jacks

Help Support HMEM:

jgarrett

Well-Known Member
HMEM Supporter
Joined
Aug 22, 2007
Messages
193
Reaction score
1
I need to find a source for mini DIN chassis mounts and plugs so I can switch my DRO between my mill and lathe. 4 pin would be fine. I have several mouse cables that I can use for the plugs but have not been able to find any chassis mount jacks.
Any help would be appreciated.
Thanks,
Julian
 

SandyC

Well-Known Member
Joined
Jan 7, 2008
Messages
158
Reaction score
6
;D ;D ;)

Hi you guys, I'm new here and based in the UK and I am known to BOGSTANDARD, ??? ;D :p so blame him....He He.

A source for both standard and mini-din connectors in the USA is http://www.action-electronics.com

They do both cable and chassis mounted types from 3 pin to 8 pin and with mail Order.

Hope this is of some help.

Best regards.

SandyC. ;D ;D
 

shred

Well-Known Member
Joined
Jul 19, 2007
Messages
1,949
Reaction score
6
Also look for S-video jacks-- they may be easier to find and fit the same (if you have the right 4 pins.. more than that will be trouble). If all else fails, you could whack some ends off mouse-extender or KVM cables.



 

jgarrett

Well-Known Member
HMEM Supporter
Joined
Aug 22, 2007
Messages
193
Reaction score
1
Thanks!!! Both sites are new to me and look pretty interesting.
Julian
 

Tin Falcon

Well-Known Member
Joined
Jul 9, 2007
Messages
7,212
Reaction score
769
Julian:
Try http://www.newark.com/ IIRC they have a $25 min but check it out could be wrong if you want to do local radio shack carries the 9 pin serialconnectors. I just picked one up last night for a project /repair.they are a little pricey but good for one or two items and no shipping.
Tin
 

jgarrett

Well-Known Member
HMEM Supporter
Joined
Aug 22, 2007
Messages
193
Reaction score
1
Got some on the way from action electronics. About 12$ for a set of 4
Julian
 

Latest posts

Top