Compressed Air V-8 Aero Engine

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

cfellows

Well-Known Member
Project of the Month Winner
Joined
Aug 25, 2007
Messages
3,890
Reaction score
715
Compressed Air V-8 Aero Engine modelled after the Cirrus and the Whittle model engines. Engine is made entirely from bar stock, is 4 stroke with a bore of 3/8", and is a little over 3" long. Engine was designed and built by Chuck Fellows, drawings were done by John McClelland. These plans are free to the public for non-commercial use.
Chuck

-igp2399.jpg


View attachment cirrus-dwgs.pdf
 
Compressed Air V-8 Aero Engine modelled after the Cirrus and the Whittle model engines. Engine is made entirely from bar stock, is 4 stroke with a bore of 3/8", and is a little over 3" long. Engine was designed and built by Chuck Fellows, drawings were done by John McClelland. These plans are free to the public for non-commercial use.
Chuck

View attachment 98325

View attachment 98326
 
Compressed Air V-8 Aero Engine modelled after the Cirrus and the Whittle model engines. Engine is made entirely from bar stock, is 4 stroke with a bore of 3/8", and is a little over 3" long. Engine was designed and built by Chuck Fellows, drawings were done by John McClelland. These plans are free to the public for non-commercial use.
Chuck

View attachment 98325

View attachment 98326
Thanks.This will be a challenge with your inches do to my Swedish mm. looking forward to a lot of nice problems
ola maltesson
 

Latest posts

Back
Top