seadragonfoundry
Well-Known Member
- Joined
- Sep 9, 2012
- Messages
- 65
- Reaction score
- 66
Once again, my patterns and castings. The build plans and instructions are from Model Engineer magazine . I didn't cut the skew gears, I did the calcs for these and have them made in Melbourne , 6 sets at a time. I have also built them with the governor and twin flywheels. I made the cylinder casting 1/2" longer than the plans as I think the original looks a bit short. An interesting engine to build.Thought I would leave this one unpainted.
