Carriage Stop for a 8x14 lathe

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

BillH

Well-Known Member
Joined
Dec 11, 2008
Messages
152
Reaction score
1
I uploaded a PDF for my carriage stop. It is very easy to make and very strong. There is plenty of metal left on it for you to modify it as you see fit. Maybe you want to add a micrometer stop, a simple bolt, or perhaps an Acme screw and a graduated dial. What ever you wish, or use it as it is.
Here is a pictuer of it!

CarriageStop01280901.jpg
 
Thanks for the pdf Bill. Nice job. :bow:

Rgds
 
Bill,

Thanks for the post. A carriage stop has been on my ‘round tuit' list for quite a while and your picture motivated me finally 'get tuit' :)

I have the Lathemaster 9X30, so your idea will transfer perfectly.

---TinkerJohn---
 
No problem, my next project for the lathe will be a cross slide stop that is adjustable for two directions.
 
BillH said:
No problem, my next project for the lathe will be a cross slide stop that is adjustable for two directions.

I will be watching for this one. :bow:
 

Here ya go one round tuit :big: :big:
nice copied for files



RoundTuit.jpg
 

Latest posts

Back
Top