Cam shaft profiles.
- Thread starter makila
- Start date
Help Support Home Model Engine Machinist Forum:
- Joined
- Aug 7, 2014
- Messages
- 57
- Reaction score
- 68
Hi all,
I have had a reply from Volker Jung, see below,
Hello,
sorry, we have change the followed drawings. See the pdf`s.
Mit freundlichen Grüssen
Dipl.-Ing. Volker Jung
The pdf files are attached for info.
Looks like we were right to follow this one up, the cam sequence was not right in the original drawings. I hope that this saves a lot of work making the cams.
I wish to thanks Petertha and Dieselpilot for their inputs and agreeing with the assumption that the cams did not look right - this was what had prompted the followup with the plan's designer.
It was a great response and restores confidence that the plans have some feedback mechanism should this be required.
Steve
View attachment 34E-cam shaft.pdf
View attachment 98E-moving assembly group.pdf
I have had a reply from Volker Jung, see below,
Hello,
sorry, we have change the followed drawings. See the pdf`s.
Mit freundlichen Grüssen
Dipl.-Ing. Volker Jung
The pdf files are attached for info.
Looks like we were right to follow this one up, the cam sequence was not right in the original drawings. I hope that this saves a lot of work making the cams.
I wish to thanks Petertha and Dieselpilot for their inputs and agreeing with the assumption that the cams did not look right - this was what had prompted the followup with the plan's designer.
It was a great response and restores confidence that the plans have some feedback mechanism should this be required.
Steve
View attachment 34E-cam shaft.pdf
View attachment 98E-moving assembly group.pdf
Similar threads
