seadragonfoundry
Well-Known Member
- Joined
- Sep 9, 2012
- Messages
- 65
- Reaction score
- 66
This is one of a pair of engines I built based on an Australian Buzzacott 2 HP hit and miss engine. I made the patterns and core box and cast the parts in iron, brass and aluminium in my home foundry. The gears were cut using home made form relieved gear cutters to a method described in The Model Engineer, I am fortunate enough to own a full set of this publication( up to 2010 anyway). These are easy engines to build and get to run, unlike some I have built in the past!
http://youtu.be/M44owXb-PH8
http://youtu.be/M44owXb-PH8