Have posted some of this elsware on these pages. Photo 1 turning the oil filter can on my very old Laylor Ayers lathe. 2 The sump with oil pump and filter parts. 3 All fitted up, discovered some bad spots in my lost foam castings took a bit more time to fix, couple of plugs and Locktite. 4 & 5 Made a start on the crankshaft, begun with 3 inch round bar about 10 inches long. 6 The CAD drawings. Thanks for watching Ted from down under.
Building a half scale Opposed Twin Onan engine for a quarter scale Rail Inspectors trolley.
- Thread starter teeleevs
- Start date
