Boiler Feed Pump, part one, PM Research Kit

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Gerald Pierce

Member
Joined
Sep 1, 2019
Messages
21
Reaction score
20
Location
North Carolina
I made the PM Research pump kit.

I made three videos showing how I did the set up and machining of the parts. Not all of the work is shown.

Plans include a copyright and are not shown.









Gerald Pierce
 
Last edited:
Nicely done! I'm working on the PM #1 boiler and picked up one of those pumps as well.
I'll have to get extra creative on boring and spot facing the ball seats using a smaller endmill (Sherline setup). Your setups will be helpful for visualizing the steps I'll need to work through.
 

Latest posts

Back
Top