cl350rr Well-Known Member Joined Jun 23, 2009 Messages 198 Reaction score 6 Nov 24, 2010 #1 Does anyone know where to find a drawing of the mounting plate for using automotive points on aDuclos odds and ends engine?
Does anyone know where to find a drawing of the mounting plate for using automotive points on aDuclos odds and ends engine?
doc1955 Gone Joined Aug 26, 2009 Messages 1,261 Reaction score 163 Nov 25, 2010 #2 The Odds And Ends engine didn't use automotive points. It use's a piece of hacksaw blade and a setscrew.
The Odds And Ends engine didn't use automotive points. It use's a piece of hacksaw blade and a setscrew.
cl350rr Well-Known Member Joined Jun 23, 2009 Messages 198 Reaction score 6 Nov 25, 2010 #3 thank you, yes I know. I have the hack saw points setup on it now but I have read that some folks ran into trouble with them and made up a plate to mount a set of auto points to make the engine easier to tune.
thank you, yes I know. I have the hack saw points setup on it now but I have read that some folks ran into trouble with them and made up a plate to mount a set of auto points to make the engine easier to tune.