anyone interested in a radial team buid

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Mike,


Sounds like a plan ... looking forward to your part.

Thanks,

Pat H.
 
This as gone a bit quite.

Or is it a bit like a duck:-------------- lots of paddling under the water

:big: :big: :big: :big:

Stew
 

Glad you're still looking in Stew. Everyone on the team has a pretty good pile of parts and
we're waiting patiently for the few remaining bits, meanwhile there is some fitting and finishing to do.

Maverick


 
I've been busy watching your new build ...



Pat H.
 
Parts 99,9% done!
I just need to round the cylinder's edges and give a final polish on them!
Will ship them on saturday! Sorry for the delay! :-[
 
I got a PM from t_ottoboni wanting to know who still need cylinders and pistons?

So please post if you have no recieved any yet

Thank you
Chris
 
Hi

As of yet, I have not received these parts.


Joe
 
t_ottoboni sent me more parts ... only need one more to start the assembly process. Thm:
Getting closer 8)

Looking forward for it and thanks for the update. :)

Pat H.
 
Thanks T-otto for the note looking forward to receiving your parts . Have the wood bases and the bolts been sent Or are these now up to use to get . Thanks all Dale
 
wood bases and m3 nuts/threaded rod will go out asap.
bit strugling with my health last few weeks. fell of me bike (the one with pedals and muscle power) and fractured 4 ribs, collar bone and dislocated shoulder. :( :( :(
Pascal
 
My gosh ... does that include a bit of a tumble down rocky mountain side?
Good thing you were wearing a helmet (you were ... right?) stickpoke

Get well soon.
Probably should stay off a bike for a while. :D

Were you racing?


Pat H.
 
i always knew it, my wife disagrees. but anything with two wheels should have a engine in it :p
it's all very painfull, but it will heal up. went with the bike to get some small groceries. dont realy recall what happend, but bike threw me off and i fell on the edge of the sidewalk. is about 10 cm high conrete edge.
no bycycle's for me now for a while. tire me down anyway, i need something that burns fuell to move forward.
pascal

ps, i don't have piston/cilinders yet
 
Tarik:

I got your parts today as well. They came out really nicely, I like how you did the inside of the pistons.
Thanks for the key chain as well!

Cheers, JOe
 
Back
Top