Just a heads up if you use an angle grinder or an abrasive cut off.
If you cut off a piece of silver steel or drill rod etc - the final part of the cut goes bright red and consequently air hardens to glass hard.
Face it off with a tipped tool before bringing in one of your finely sharpened HSS cutting tools.
Guess what I just did.
Ken
If you cut off a piece of silver steel or drill rod etc - the final part of the cut goes bright red and consequently air hardens to glass hard.
Face it off with a tipped tool before bringing in one of your finely sharpened HSS cutting tools.
Guess what I just did.
Ken