A video of my newest engine--a double acting wobbler

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Brian Rupnow

Design Engineer
Project of the Month Winner
Joined
May 23, 2008
Messages
14,917
Reaction score
8,219
Location
Barrie, Ontario, Canada
I have been experimenting, trying to post a reasonably good video of my most recent build, which ran Tuesday for the first time. ----I had the air pressure too high at first, then turned it down to slow the engine down.---Brian That is my hand turning the engine to show the rear of it. -I had a 1/4" bolt screwed into the tripod mount on the bottom of the camera, and the bolt held in my vice!!! This is my "first ever" milling machine project, on the Craftex mill that I bought on June 19th (and thank you Shred, for your help)
http://s307.photobucket.com/albums/...ion=view&current=DOUBLEACTINGWOBBLERMOVIE.flv
 
The .MSWMM file is the Movie Maker Project file, which won't do us any good. You need to hit the 'publish movie' or 'save movie' button and upload that instead-- the result will end in .WMV



 

Latest posts

Back
Top