a new work in progress my new 8,02 cc model glow engine.

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Feb 8, 2013
Messages
274
Reaction score
187

Hallo Model Engine Friends,
I started this work the making of a new model glow engine during the Wintertime of 2014.Ithen started to make a for me hugh model glow engine with a cilinder displacement of 8.02 cc(49).
I have the intention to lead you through the stages of making this engine by showing you many photos made by myself in my hobbyroom
This engine is also developed by mr.Chris Boll from the U.K. who also designed "3" other model diesel engines which i also made.
I hope that you enjoy this photo tour.It was a pleasure for me to make such a hugh model engine once ,but if a next engine should follow in the nearby future it will be a small one again.
My machinery and tools are better to make the smaller size of model engine.

many greetings from modelmotor-Gerard-The Netherlands-Europe.

DSC02788.jpg


DSC02789.jpg


DSC02807.jpg


DSC02801.jpg


DSC02812.jpg


DSC02814.jpg
 
Hi Gerard

Are there some more pics coming or have you started by making the piston ?

Emgee
 
Hi Gerard

Are there some more pics coming or have you started by making the piston ?

Emgee
Hallo Engee

Yes many more pics will come next week skeep watching Engee i hope you like those pics too.
It's late so i stoppef to f continuate next week again.

Many greetings from modelmotor.
 
Hallo Model Engine Friends,
Here i am again with some pics made during the making of a new model glow engine.I apologize for having not a chronical system in my pics collage,but the pics will
tell their own story about each engine part i madeas far as pics can tell of course.There are some of pics made from the Piston and Prop Driver.
I hope you like my pics a bit they are always to look back how things went in that time/moment.

Greetings from modelmotor-Gerard-The Netherlands-Europe.

DSC02809.jpg


DSC02815.jpg


DSC02819.jpg


DSC02820.jpg


DSC02822.jpg


DSC02823.jpg


DSC02825.jpg


DSC02826.jpg
 
Hallo Model Engine Friends,
Again some of my pics are comming to tell the story from the making of my Model Glow Engine.

Many greetings from modelmotor

DSC02829.jpg


DSC02831.jpg


DSC02832.jpg


DSC02833.jpg


DSC02834.jpg


DSC02836.jpg


DSC02837.jpg


DSC02843.jpg


DSC02840.jpg
 
Last edited:
Hallo Model Engine Friends,
My next picture serie shows the making from the cilinder head from Bar stock Aloy.
The screw thread for the cilinder head can either made with a metal lathe or with a handtool as my pictures show.
I hope that it is worth to see it.
many greetings from modelmotor.

DSC02843.jpg


DSC02844.jpg


DSC02846.jpg


DSC02847.jpg


DSC02848.jpg


DSC02849.jpg


DSC02850.jpg


DSC02851.jpg


DSC02854.jpg
 
Hallo Friends
Here are the pictures from the cilinder fins section complete till it was finished.
One picture shows the complete set cilinder head and cilinder fins section.

Greetings from modelmotor.

DSC02858.jpg


DSC02859.jpg


DSC02860.jpg


DSC02861.jpg


DSC02867.jpg


DSC02869.jpg


DSC02870.jpg


DSC02871.jpg


DSC02873.jpg
 

Hallo Model Engine Friends,
My last pictures for today tomorrow comes a new day then i will put more pictures on my thread.
I hope you like these pictures too on which i am making the cilinder jaket from bar stock aloy on a standard metal turning lathe.

many greetings from modelmotor-Gerard-The Netherlands-Europe.

DSC02874.jpg


DSC02875.jpg


DSC02877.jpg


DSC02878.jpg


DSC02880.jpg


DSC02883.jpg


DSC02884.jpg


DSC02885.jpg
 
Hallo Model Engine Friends,
Today a number of pics from the making of my new 8,02 cc model glow engine will find a place on this great website.
I hope you enjoy the pics again.

many greetings from modelmotor-Gerard-The Netherlands-Europe.

DSC02887.jpg


DSC02889.jpg


DSC02892.jpg


DSC02894.jpg


DSC02895.jpg


DSC02896.jpg


DSC02898.jpg


DSC02899.jpg


DSC02900.jpg
 
Hallo Model Engine Friends,
Today you will also see a few extra pics from the making of my cilinder liner,pics from the rough engine parts i made till that particular moment and the making from
the Crankshaft.I hope you like these pics as well.

many greetings from modelmotor-Gerard-The Netherlands-Europe.

DSC02906.jpg


DSC02911.jpg


DSC02912.jpg


DSC02913.jpg


DSC02914.jpg


DSC02915.jpg


DSC02918.jpg


DSC02921.jpg


DSC02922.jpg
 
Great post with lots of clear pics. Thanks for sharing. Just wondering what the white stuff is in the threading pic. Looks like shaving foam :D
 
Hello Gerard , I am very curious how well your new engine will runs. Its design looks smart and simple. I like it.
 
Hallo Herbie,
Indeed it looks like shaving foam.You are right by saying that.It was expensive and the product name is Anchorlube G771.It's a product from W.Metzger&Co.AG CH-4932Lotzwil BE-Schwitzerland-Europe.It's ment to be used by cutting screw thread,Boring,Reaming and cutting from steel for example.There must be someinformation about it on the internet i think.I bought it when i was at an oldtimer exhebition one of the many i visit each year together with my son.It was offered there at a toolstand so one platsic bottle had been bought by me.I hope you can do something with this information.

many greetings from modelmotor-Gerard.
 
Hallo1xb1,
I am curious too how it will run.It's a longstroke single cilinder engine with a reasonable cilinder volume.I will know more about the running qualities when Spring/Summer comes.
The engine needs an extra finishing touch before i even can think of running,but i have very hopefull expectations that it will run with a reasonable number of rotations.The simplisity from the construction makes it hopefully an easy starter, compression enough so that will not be the problem i think.
I will let you know as soon as some starting try outs have been taken place.

many greetings from modelmotor-Gerard.
 
Hallo ShopShoe,
No problem at all thanks for the good info.I really do n't know what i paid back some years ago,but at the oldtimer exhebition in my country it might be
that the selling price was a bit higher because of the extra costs for the import from Schwitzerland to my country and then the distribution to get it on the market.

many greetings from modelmotor
 
Hallo Model Engine Friends,,

Today also a number of pictures on this website can be seen all about the making of my 8,02 cc model glow engine.You see the milling from the square part
of the venturi tube which i do n't use.I use a modified R/C Carburettor and i am trying to make a complete one my own.The other pics are from the boring
activity from a hole in the piston to mount through the Wristpin makes the real connection between the piston and the conrod.

many greetings from modelmotor.

DSC02937.jpg


DSC02941.jpg


DSC02942.jpg


DSC02943.jpg


DSC02945.jpg


DSC02946.jpg


DSC02947.jpg


DSC02948.jpg


DSC02949.jpg
 
Hallo Model Engine Friends,
Let's go on with another serie of pictures made during the making from my 8,02 cc model glow engine.
I hope you like the pictures i made from each engine part.

many greetings again from modelmotor-Gerard

DSC02955.jpg


DSC02956.jpg


DSC02957.jpg


DSC02958.jpg


DSC02960.jpg


DSC02963.jpg


DSC02964.jpg


DSC02967.jpg


DSC02968.jpg
 
New serie pictures 8,02 cc model glow engine.The fronthusing,the backplate and the rotary disk to mention a few parts.A complete crankshaft including several other parts can be seen as well.

modelmotor.

DSC02969.jpg


DSC02970.jpg


DSC02971.jpg


DSC02973.jpg


DSC02974.jpg


DSC02976.jpg


DSC02977.jpg


DSC02978.jpg


DSC02979.jpg
 

Latest posts

Back
Top