Marty Feldman
Well-Known Member
- Joined
- Nov 24, 2009
- Messages
- 52
- Reaction score
- 5
For Atlas 618 lathe. Need two: 1/8 and 1/4, with internal 3/8-16 thread.
-Marty-
-Marty-
-
If you have bought, sold or gained information from our Classifieds, please donate to HomeModelEngineMachinist and give back.
You can become a Supporting Member which comes with a decal or just click here to donate.
Wanted 2MT collets
- Thread starter Marty Feldman
- Start date
Help Support Home Model Engine Machinist Forum:
Marty Feldman
Well-Known Member
- Joined
- Nov 24, 2009
- Messages
- 52
- Reaction score
- 5
Just got the two collets I wanted, so I am all set. \Thanks.
-Marty-
-Marty-
They are sold new try Shars.com. They also have end milling holders in 2 Morse from 3/16 to 3/4" and metric too.
If look download section I have drawings I for Morse 2 tooling.
Both my mill and lathe has 2 Morse makes handy
Dave
If look download section I have drawings I for Morse 2 tooling.
Both my mill and lathe has 2 Morse makes handy
Dave
