2013 vendor info & form

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

PTsideshow

Well-Known Member
Joined
Apr 12, 2008
Messages
503
Reaction score
19
Here is the vendor info and a PDF form. There have been some changes to the information that is contained in and have been followed in the past years! Please pay special attention to the new policy on USE OF THE FORK LIFT and new unloading rules, Due to abuse of both. The policy and procedures have been changed! There is now a charge for fork lift use by the arena! You will have to make prior arrangements with the YACK Arena for costs, payments,and scheduling of use. NAMES is not responsible for forklift scheduling,use, or fee payment. Also please read the SET-UP section for the new rules and procedures. Please use the address on the PDF form for requests for tables or booth and sending of the check for payment. The form can be downloaded here, at NAMES Show Forum http://www.smokstak.com/forum/showthread.php?t=113497 For any vendor other information please contact James Snider his information is on the last page of information.
IMG_0001.jpg
IMG_0002.jpg
IMG_0003.jpg
IMG_0004.jpg
 
Back
Top