# 2 Oiler Plans?

Discussion in 'Engines From Castings' started by cheepo45, Dec 15, 2011.

Help Support HMEM by donating using the link above.
  1. Dec 15, 2011 #1

    cheepo45

    cheepo45

    cheepo45

    Member

    Joined:
    Dec 22, 2010
    Messages:
    220
    Likes Received:
    63
    Hi Everyone,
    I am working on a 1/4 scale Gade motor. It calls for a #2 drip oiler. Does anyone know of any plans for this oiler? How about a cheap source for glass or acrylic tubing for small oilers?
    Thanks,
    cheepo45
     
  2. Dec 15, 2011 #2

    mecanotrain

    mecanotrain

    mecanotrain

    Member

    Joined:
    Dec 7, 2011
    Messages:
    21
    Likes Received:
    7
    Hello cheepo45,
    For the glass tubing go to ask for "pipettes" in your local laboratory of medical analysis. It is free (in France).
    Very good too for the water gauge.
    [​IMG]

    Best regards
     
  3. Dec 15, 2011 #3

    deverett

    deverett

    deverett

    deverett

    Joined:
    Sep 6, 2007
    Messages:
    979
    Likes Received:
    170
    1/4 scale Gade from Morrison & Marvin? They also do drawings and a small parts kit for the oiler, which includes the glass. The kit used to cost $7.50.

    Once you have the drawings, you can scale them up and use the suggested machining sequence to make any size oiler you desire.

    Dave
    The Emerald Isle
     
  4. Dec 15, 2011 #4

    cheepo45

    cheepo45

    cheepo45

    Member

    Joined:
    Dec 22, 2010
    Messages:
    220
    Likes Received:
    63
    Thanks, everyone for your help. This is what I like about this site! Have a great holiday season.
    Cheepo45
     
  5. Dec 22, 2011 #5

    Lamachina58

    Lamachina58

    Lamachina58

    Well-Known Member

    Joined:
    Nov 13, 2010
    Messages:
    74
    Likes Received:
    0
    Sure would like to see the oiler progress and the gade too. I hope to make that next and have been pouring over the plans.
    Good luck!
    Tom
     

Share This Page