Search results

I picked these up awhile ago and just don't see them going anywhere in my shop, other than under the bench. I only have the block and the pan. Nothing else. The block is cast iron and the pan is aluminum. I don't have prints, or any other castings for this engine. Just these two pieces...

I have an Iscar MWLNR 12-4W tool with 14 inserts. This uses WNMG 43- inserts. I am including 432 inserts which have a .8mm nose radius. These are double sided inserts that are good for roughing. I got this tool in the tooling package with the lathe I bought earlier this year. The shank on...

I have this parting/grooving tool that I got with my lathe and won't be using. It's got a 3/8" shank and includes 7 carbide inserts as well as the tool to remove the inserts. These work great. I'll sell for $40 which includes shipping and paypal fees. You pay $40, that's it. Thanks, Martin

More tools that came with my lathe. I won't use these as I have other tools that I like better. No need for me to keep this. The tool has a 3/8" shank and also includes 12 inserts. These inserts are single sided with three cutting edges each. They are all new. I'll let this go for $40...

I have some tooling that came with my lathe when I bought it that I don't need and won't use. Hopefully someone can use this. It's got a 3/8" shank with 8 new carbide inserts. It works great, but I have other threading tools that I like better, so no need for me to keep it in the cluttered...

I've been cleaning out the shop and have these. They are all extras to my other sets, so no need for me to keep them. They're all in pretty good shape. Some have some mill marks on top, but the insides are all good, no rust or galling inside. Sizes listed in the first picture. 26 in total...

I have some extras that I don't need and hope someone else can use them. The hex sizes are: 3/8", 7/16", 1/2", 9/16", 5/8", & 3/4". There are also an extra 1/2 and 9/16 hex collets. Also throwing in a 1/2" square collet. All go together, I'm not selling individually. I will sell them for...

I was perusing facebook marketplace last week and found this gem. It was about a two hour drive from me. It's a machine built in 2007, English and Metric threading, 4k rpm spindle. There is a 3 jaw chuck, 4 jaw chuck, tailstock chuck, live centers, full set of collets plus an almost full set...

This is the front part of the carriage with the top slide holder on it. All gears on the front apron are in good shape. The threading half nut works as it should and is in fair shape. Plenty of life left in it. There is some surface rusting on the top of the top piece. I got some of it off...

This is the front carriage from a Rivett 608 lathe. The serial number is 361 which dates it to 1935. This is from the same machine I have a headstock for sale from. The carriage is in overall good shape. All the gears on the backside are in great shape, so for those of you who have worn out...

This is a headstock from a Rivett 608 serial number 361 which puts it as a 1935 machine. It is great shape. The bearings are smooth, the oilers both are there and work well, it has the reversing gear on it for the feed and it works perfectly. The back gear has both covers over the gears. The...

I have a casting kit of the Magnum 91 (15cc) r/c plane engine. This was originally put out by Morris Moser, at least that's what the drawings show. Best I can tell is that it's from the early 90's. I picked this up several years ago and then proceeded to add to my casting kit collection to...

I recently bought a toolbox from an auction and it was full of a bunch of drills, chamfer tools, and counterbores. The drills are all in good shape. Some of them may need sharpened, but for the most part they have little use. Some of the chamfer tools have been resharpened. The counterbores...

I have a set of rivet swaging tools that I used on my PM Research vertical boiler. The big tool is a 2" bar of steel with the sides milled off so you can put it in a vice. The three hammering tools are made to the prints that come with the boiler. I'll throw in the bolt with the swaging tool...

Perkins kit I built from the casting kit. It runs great and only needs some coleman fuel to run. Everything else is included. I have converted it to run on electronic ignition rather than the points per plan. It runs fantastic. All the electronics are in the oak box up front. If you...

I have the last bunch of turning tools read to go. There are 3/8", 1/2", and 3/4" breazed carbide tools. There are a few HSS tools in there as well. You pay shipping. Thanks, Martin

In my quest to clean my shop before I move in a few weeks I came across a bunch of tools that I won't use in the near future. There are plenty of brazed on carbide tools both 3/8 and 3/4, couple of endmills, and a bunch of taps of all different sizes. There are both metric and standard. The...

I have a new in box set of 0-6 Starrett 436.1 Mics. These have the ratcheting thimble on them as well as a lock nut and resolution to .0001". Very nice set up to six inches. All mics are new and never been out of box except for the pictures you see here. All standards are included as well...

This is all 360 Free Machining Brass. All cut offs from a job I did awhile back. I have several different lengths. You can see in the pictures, but I'll list them out here for you. All dimensions in inches and all pieces are 2.75 inches in diameter. Lengths 1.3 1.9 2.4 1.15 1.95 1.8 1.25...

Hello, I have several parts for the v-twin Hoglet. When I started making mine I thought it would be a good idea to make duplicates of each part just in case. Well, my engine is far enough along that I think I can safely get rid of the extras. What I have is not enough to build the engine...