Search results

David great link; do you know where you could get blue prints. I can't deside to do one of those in 1/3 or 1/4 scale. It would also be hard to take to Cabin fever but everyone would love it.;)

Pat, I'm sorry but my mauual is also the wrong one.

Pat I may have what you need. I will look at shop tomorrow.

Keith, Your engine is awsome, hear is my Two cents on your gaskets. Cut them out of copper than anneal them. This has worked for many high proformance engine builders for years. Hammer

I make pieces like that with a thread repair file. Nice thing you have a choice of threads per inch. Just mount it in a block and cut a 90degree slot the width of the file. This is a fast way and can cut any thing not file hard.

Brian, First I like your idea, I like the idea of the Oak. My Grandfather's family used Hickory bands in Model T Fords, I have one of the bands. But I have a idea for you that might help. I have seen something like your design smoewhere but they used the cone part of the clutch to...

Tim, I didn't know but Grizzly quit selling them, it was item#G8076. So sorry.

Cooper is my hammer of choice. I have used them for many years. I have at least 8. Grizzly sales a nice one but I have pick them up at auction, got a 5 pounder this summer for $8.00. I think its worth $40.00 for junk. Anyone who has never tried one needs too. Least my moto. I can fix any...

Loctite make a product that works better than RTV it's #510 Flange sealent works at higher pressure. Will fill gaps up to .010".

peterta, This is why I love this site. I have been looking for a calculator just like your post. THANKS

Antman, I found your post and I have one of those drills I think it still runs but doesn't have the handpiece. I can check to see if it runs if you would like to buy it. Say $75.00 plus shipping? Let me know. Hammer2100 ps:I'm in West Virginia

I loved the video also but can anyone tell me of a dealer for Mircona in the GOOD OLD USA. I have a job coming up that I think one of those would be very helpful. Thanks :bow:

I was lucky to have gotten a dail indicator holder in a auction lot. It is awsome. I didn't even want it I was bidding on a cylinder bore gague that was in the box. ;D

Bob, Thank you I have been looking a new project & I just found it. hammer2100

:bow: Makes me want to work on my 1/3. Thanks!

I have good luck with Brownell's OXPHO-BLUE. You have too make very sure to clean all oil off parts. I'll put parts in small oven a preheat to get oils out of metal sometimes this takes 2or3 times. This is a long lasting finish if you do it right. Almost as good as hot salt bluing. It helps if...

Exhust port timing will start at the highest point of the oval. Because of the loss of compression down the port. I don't know what your working on but have you thought about what are called boost ports. Thease are placed higher than the larger port but are there to aid in getting exhust...

I hope you wouldn't mind my two cents. Bridges do sieze I have seen hundreds. I have built many high horsepower motorcycle engines. The best don't have bridges. If the port is designed with a good expansion chamber the pipe size will be alittle smaller than the port. It is important to keep the...