Search results

Thanks to all. Looks like I lucked out, I found ALL the issues of Strictly I.C. on E-bay that covers this engine.

Thanks for the email, I'll send them a note and ask. The single vertical is what I'm trying to find.

Good day to all. Was wondering if plans are still available for the engines??? Upshur engines Thanks Jeff

In the shop early this morning and here are the results, Now I will need to do the same thing all over for the other cylinder. I order enough metal to finish the engine last week and substituted 304SS where the planes called for CRS, it should be in by next week. I’ll keep you posted on the...

Just a thought, but I made this out of a piece of Rail road rail, tempered is best I could by putting the whole thing in a wood cook stove and getting it cherry red then quenching the top and the base was left to cool on its own. Has worked very well so far, and not a single divot on the face...

Did I say Long Term :big: Still working on this, or should I saw would like to complete it! today started on one of the Cylinders and Steam Chests today, and below are the results. Rough casting Surfaced top and sides with a Fly Cutter Finished product. Then I turned my attention to one...

Hey Ronald and Welcome. I have built a couple of 10V and the 10H, both were built on the machines below.

I started the other rear bearing assembly, now I just need to find my bearing material for the insert. I also started on some of the many nuts and bolts ill need for the project.

I found a little inspiration http://youtu.be/oPgtwTveU48 http://youtu.be/dq3pVsE6oYM

Started to work on this project once again. Part F-11 Rear Bearing, planes called for ½ x 1 Brass but I had steel on hand so I used it and pressed some Bronze in for bushings. The next items to make will be F-12 another Bearing for the rear end and also F-13, a Bearing used in conjunction with...

So your the one,Glad it wint to a good home. Your other Engine is on its way and I have inculded some Extra items hope you can use them. Enjoy!!!!

I would like nominate this for Project of the Month. It’s a great looking lathe! Thm: Thm: Thm:

What are you using to bend such nice “un-kinked” 90s in brass tube? Thanks!

Man at this pace you’re going to be blowing your safety before spring!

I have been watching this thread with Great excitement, and can guarantee that I nominate it for Project of the month when complete. Beautiful work Jeroen! Thm:

Here is another option. http://www.john-tom.com/ElmersEngines/41_factory.pdf

I somewhat started this build. Main Rod. This is probably a very unconventional way of doing things, but this is the First such rod I have ever built. Now I need to finish the other one. The Rod its self is Alum the Bolts are Stainless Steel.

Bogs, I think you hit the nail on the head!

Thanks Dave Great Link, this will keep my busy for the rest of the morning.

I'm not sure I agree with this. I'm thinking maybe you didn't quite mean to write it as it came across or I'm misinterpreting. -Trout Trout, I think you may be misinterpreting and I am not the best communicator. Zee did a great job on his 2nd engine and I Think he won because of the Fit and...