Search results

The issue I had was that 1/2" tools were too high, just above the center line of the lathe. The mod I did fixed that issue.

For what it's worth I have the same lathe though it's about 4 years old if that makes a difference. The issue I had was I had to shave a little off the bottom of the tool holders when using 1/2" tools as the holders sit on the top of the compound slide before the tool is at the center height...

That's kinda what I was saying. Letting others know that the version of operating system they're running can affect their outcome.

I also had to get the "fix" on the Nano clone when using Win 7 but it was built in to Win 10 and worked without further input.

Very nice. This is how I handle my concaves and convexes.

Pictures of what you're doing would be cool.

If I understand what you want to do this is the code I used on my stand alone rotary table. Will probably have to modify the code as it's set up for a certain gear ratio rotary table. This should be post number 80 of a very long discussion. Hope it helps...

You can set the drive for the highest max current then add individual overload blocks between the relays and the smaller motors.

I've been trying to learn Fusion 360 also. One of the issues I've been running into is that the controls seem to change from when older tutorials were made. When shown how to do something I have to search Google to find where the control is now or what it's now called. Then the worst part, I...

Thanks for the info! You must be near me? Randy

Hi, Mark. I live in Kelso and would like to know where you buy your steel? Randy

Kelso area has the best pizza

A/C voltage tends to blow you off but D/C voltage makes your grip lock onto it.