Search results

Ken, so that's what I thought I was doing it just as you sent the reply, so you rewound the motor for 3 phase instead of just doing a VFD?

Well, I guess I'll just deal with it in one way or another. Happy holidays!

There's a picture

OK, everything working good except forward in reverse is backwards. can you suggest which wires to switch to correct? Thank you, John C

Yes I have a South bend laithe that I put it in inverter duty motor on and VFD that makes it easier for reversing and hook up

Put back to this wiring here and motor much happier forward reverse no issues no problem 4.3 amp draw on all legs

Ken, This Wiring blew breaker when engaged and turn switch to the right immediately

So as wired up as is, Are the correct condition? Correct? to confirm.

Here is the orientation and nomenclature for the white block terminal

Ok, i will move 150UF cap off terminal ZW1 and move it to V1 and report back to you guys. I wanna say again how much I appreciate this and everybody's help. This is the 1st time that the mill has been on a table and running after when I purchased it. i lifted it up to put on the table and it...

Post 17 a picture might be clearer

Ok, Running in both directions. One leg amps 4.2 and 4.4 Other leg 4.2. 4.4 Those values for forward and reverse. See pictures as to how wires are landed

When the motor was sent to me that's where the Were positioned V-1 Z1W1 and V-2 terminal on motor white block

Claudio, Please review this paperwork insert for a selection of different scenarios for an AR14 switch, Do any of these sequence meet what you described.

So you're saying a regular drum switch example furnas R44 or square D. 2601 type would be more appropriate?

All the wire labeling and switch numbering that is on the switch was factory when received for the original 110 set up. The only numbering that is different is from the diagram that I posted with my numbering just for convenience for me to understand better.

Excellent ! when I hook it up and test it I will be back with you on results. All your help is Greatly appreciated. Thank you!

So you're saying install these jumpers on the below statement I made earlier before trying to fire it up? "Originally this switch also had jumpers from 9 and 12 and 8 and 11 according to my numbering diagram."