Search results

hi I'm in the proses of refitting a Burgess bandsaw BBS.2 has any one got one if so can you gets sum pics of the blade guides in the top and bottom and of the plug guide in the middle of the table and has any one got a Manuel they can scan for me thanks

hi all if you can get this link you will see a vid of the engine runing and sum of my other engines to http://www.youtube.com/watch?v=8HfA41Jfk7A

HI not posted for sum time so this is a bit of haw to project right i have bin shopping today at my favourite shop i.e the boot sale and i picked up 4 No1 Morse taper drill bits one well rusty one not to bad and two broken they are all inch but will be converted to MM right the badly rusted one...

HI all wile on with parts for engine No 13 the forward and revers switch on me compact 8 went with a bang so can any one supply me with a wiering diagram for this lathe and can any one supply me with a diagram of haw to wire the lathe up just on a on and off switch their is 1 blue wire cumming...

HI all i had a look a round this place today and i was imprest i don't no if their prises are OK as i have not gotten anything from them yet any way this is their name and addres M-MACHINE unit 6 forge way Cleveland trading estate darlington co Durham DL1 2PJ phone & fax 01325 381300 e-mail...

HI once a gane outstanding

HI this is my tip on a precision oilier this is haw i have made sum of my own up SOS no pics right keep all your run out ball point pens the bit you need to keep is the bit that holds the ink and the tip type 1 is remove the ball from the tip a touch on a bench grinder or dremel will soon remove...

HI all bin to me favorite shop IE boot sale the first thing i piked up is a machinist standing lamp for £2 i have started to dis mantel it the next thing was full of sowing stuff IE buttons needles and thread i seed i only wonted the the box and not the sowing stuff which was emptied out and i...

HI all i have bin given a Colet chuck by Bristol Erickson its missing its nut where can i get a new nut from my first thought was to mack this in to a Colet chuck for my lathe had a look on the net and these things go for a lot of cash the Delmer is do i sell it and with the proceeds by a Colet...

HI all I went to one of the foroms that I sumtimes post on ***************.com and its bin closed dawn by the feller that set it up with no reason why ??? if he did not wont to run the site any more why did he not ask if sum one wonted to tack over the job ??? I was in the prose of donating to...

HI don't no if this has bin dun before but what type of grease do you yous on a lathe chuck

HI all I'm having a blond moment I can not figure out the pcd for the 3 fixing screws I need this for to mack up a back plate for mi new 4 jaw chuck can any one help

HI all has any one got a 5" 4 jaw chuck that will fit a emco compact 8 lathe as cheep as possible regards bob

HI all not posted for a wile i needed a better running center as the one that i got off the net is to big see pic i have seen Meany plan's of home made running centers so i decided to have a go and mack my own i needed a MT2 i piked up a broken drill from the boot sale for 20p this will be the...

Hi all right you no when you get a new mill cuter or a set of taps they sumtimes cum with a protective coting on them see pic 1 well you can by this stuff to put on your tools your self but theirs a nother way to protect them from damage and rust you will need sum petroleum jelly or grease and...

HI next question dus any one have plans to mack a tool makers cabnet

HI all right has Any one got pics or drawings of a mi ford lm7 Cross slide I need to no wot their is supposed to be on the end you have the acme thread then the end of the shaft goes threw the end bracket then their is the fix indext wheel then the handle shod the be fiber washers on the front...

HI all well I'm one of those that always makes up to much soldering flux and i end up putting the rest in old film canesters and freesing it it lasts logier but that's a pane as when i need it next i have to remember to remove it from the freezer the night before well her is the tip keep your...

HI all right I original got he idea for this project from a article in model engineer so I have adapted it to fit my lath I already had the worm drive and shaft as this came from a a scrap motor. I turned dawn the end of the shaft to move the worm drive up on the shaft then i made up the two...

HI can any one lend me a set of m8 x1 pich left handed taps