Search results

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. B

    emco maximat v10p

    Hi i just bought home a emco maximat v10p and was looking for the instruction manual that they came with either pdf or will buy a hard copy from someone. i will get some pics up it came with the mil,l collet sets for both mill and lathe 2 chucks both emco the emco rotary table with number plates...
  2. B

    taig milling machine f/s

    Hi i have a taig milling machine for sale product Ta-2018 standard mill 1/5 hp. It has the 9.5" table z axis is 6". 6 speed 525-5300. It comes with the taig collet set drill chuck vise and homemade tooling plate. Only issue with mill is the 2 dummy marks i put in table see pics below. Asking...
  3. B

    Need help recreating finish

    Hi guys i am remaking this part for a friend. What would be the best way to recreat the knurl on the face of the part. I have made this part already just need the finish on the end. The metal is 303 stainless and about 3/4 dia. Thanks Bronson
  4. B

    Free lathe dog 1"

    Here is a free lathe dog for someone 1" i already have 2. You pay Shipping from Ontario Canada.
  5. B

    2 collets free

    I have two collets that where from a southbend lathe but don't know what model they are bigger then 3c collets one is a southbend 1/2 and the other is a 3/8 RSB I think. Both have the number 2 on them. Free to good home you pay shipping i am in Ontario Canada.
  6. B

    Help with finish Please.

    Hi i have notice that when cutting the length of a chuck of bar steel alum drill rod what ever i get a threaded look highs and lows of about .0005 i am guessing on that. Spindle speeds and feeds don't seem to change this much. I have checked spindle bearing adjustment. Apron adjustment...
  7. B

    tool post

    Hi i know tool posts have been talked to death, but i wanted to know which way you guys would go i was going to get a QCTP from http://cdcotools.com/ i wanted to know if people where happy with this place and if you would go with the piston type for $78 and 5 tool holders or wedge type and 5...
  8. B

    small fasteners

    I just thought i would post this for Canadians looking for small hardware i just ordered 0-80 cap head screws in 2 sizes, set screws and 2-56 in 2 sizes and set screws shipping taxes everything all in qty 50 of bolts and 20 of set screws $40 seem really fare to me...
  9. B

    First thread

    So i am pretty happy with myself i cut my first thread on my lathe ;D. When i was done the nut threaded on nice and was tight but i do have a question. OK first i will tell you the set up. We are working with 9" southbend lathe quick change tool holder high speed steel tool bit very sharp all...
  10. B

    Magnetic vise

    I have an Eclipse magnetic vise for sale. It is made in england model ax47 serial #8286 lenght 178mm 7" width 113mm 4 3/16 height 43mm 1 5/8. It has some marks on the top and if you need more photos let me know. Now i have no idea what this thing is worth i found one that is new and the same...
  11. B

    mini lathe 4" adapter

    I have for sale a mini lathe adapter 4" will fit a 4" 3 jaw or 4" 4jaw. $10+ shipping http://www.littlemachineshop.com/products/product_view.php?ProductID=1692&category=-1110836144
  12. B

    small craftsman lathe parts free "gone"

    Free to good home four jaw chuck and gears for craftsman lathe all i ask is alittle for shipping or if your close you can pickup orangeville ontario. There is rust on chuck but does clean up pretty easy.
  13. B

    gift

    Here is a steam engine that was given to me about three years ago. It runs pretty good on air i am a little scared to use the boiler i have never used one and don't know how safe this is. It was made in the 1970's by a German man in his spare time at work. It has a little bike gen and lights up...
  14. B

    My little shop

    Hi i throught it was about time i posted some pics of my play area. So after 3 hours of cleaning and finding new homes for some stuff and finding stuff i forgot i had i took some pics. Here they are. The last photo is the shop foreman and the boss.
  15. B

    Snow build by Joe

    I was just reading through some older posts because i just had my knee repaired and have been on the site for like 6 hours a day for four days now have learned a lot. I wanted to know if Joe got his snow engine running yet, it was a great build. :bow: :bow: Let us know if anybody has heard...
  16. B

    mill tooling

    Might have a chance to get a bridgeport milling machine with an r8 spindle. Was wondering do you guys use r8 collets or go with er collets. I also run a 9 southbend and need collets for it i was wondering if er collets would work better and i could make an adapter and use er collets on both...
  17. B

    Retractable threading tool

    Does anyone have plans for a retractable threading tool i saw one over on another site but no plans. I have a southbend and no thread dial so i thought this would help when leaving the half nuts engaged and reversing the lathe to start the second cut. Thanks
  18. B

    taig boring head

    So a few months ago i ordered the new taig boring head it was pretty cheap to buy and i have owned a taig mill for a few years and have been happy with quality and thought it would be a nice addition. I used the boring head for the first time last night it worked well even with a cheap boring...
  19. B

    taig milling machine

    Hi does anyone happen to know the bearing number for the bearings in the head of a regular spindle for a taig milling machine. Thanks.
  20. B

    Roller knives for siding slitter

    I need to make knives for a siding slitter. The knives are 3" around 3/4 thick. They cut alum siding. What type of metal should i use for this.
Back
Top