Search results

I am thinking to get a mill, and i see that the proxxon mf70 is cheap, how is the machine,can it cut steel?? i will use it to make snowmobile parts and stirling engine parts, but it needs to be able to cut steel Or are there some other machines i can use Lars

The id is bigger than the outer diameter,it sucks, cause i make alot of snowmobile axles,and i allways have problems to mount the bearings on them,cause of the od is bigger near the chuck.i got a copy of the sieg c6,and what can i do to make it more accurate??? Lars

I got a K1 n25 kennametal hertel 6.52141 r 129 boring bar"see picture" ,and i cant find any info about it, and i cant find the carbide insert for it, what insert can i use?

I have cj9525 lathe,its a copy of the sieg c6,but i dont understand how i make left treads,does anybody have a scheme,or can someone please explain it to me I did upload a picture of my scheme,but like i said, i dont understand it,i could allmost make some bad right treads,but i think i have...

i have cleaned my lathe, and i found this part, i know it is for something important, but i cant remember my lathe is a copy of the sieg c6

Hei I have build several stirling engines,and i want some plans for a fast and strong stirling engine, that i can build on my lathe, i am experienced with them stirling engines, but i can make a fast and strong engine,my last engines i only have build with plans in my head, so if someone please...

Hey My lathe has 125mm centre height, what kind of quick change tool post can i use?? can i use a 75-150mm centre hight,or shall i use a 75-115mm?? hope for some help here. Lars Ingebrigtsen

i have just mount a digital read out on my cj9525 the sieg c6 was almost a bolt on, but i have 2 z-screws left, after i was finished, i dont understand where they are supposed to be, are there any install manual on the web, or do anybody here know where them 2 z-screw should be??? Lars

Are there some place that i can purchase brass gibs to my cj9525,its the same as sieg c6??

Hei what are them z-screws for???,i also placed a piece of thin copper/brass sheet,under the fot for the saddle,and now it dont backlash so much, i only have gib screw on one side of the saddle,are there supposed to be gib screws on both sides on the saddle?? Lars i got one of them z-screw...

sometimes when i am using lathe,my crosslide flex, and it makes them cut go deeper or lower in my work piece,should i adjust the cross slide screws/nut, and tighten them, or are there som upgrade parts i can purchase, or make.i have a china lathe called cj9525 i have tryed to thighten them...

I need to purchase a new tool post to my lathe, but what can i use?? my lathe is called cj9525 the mounting bolt is 20mm at the bottom.what more do you need for seeing if i can use a universal toolpost?? Lars

I am making a stirling engine cylinder,and only have 24mm drill,and i need my cylinder diameter to be about 40mm, and i have no long cutter tool that is for inside drilling. but i have a 4 jaw chuck, can i use a drill in the tailstock, and then place the cylinder in offseth,is that...