127 is a prime number.
If cutting metric threads use 37 and 47 tooth gear inlue of 127 and 100. This can be cut on BS-0 dividing head.
This is not first time I heard some like this.
Check head stock
Some times the lathe was to over
The other problem is worse the lathe was made...
I would look at Java. The down load Firerfox and try that browser.
I use Windows 10
I have used concrete in round Mill tube .
It works great for milling steel on lite weight Mill.
I have posted in photos in the down section
You at one it was cheaper to use cast iron. Some types tools like shears and brakes have been manufacturer for 100 years.
The mache tools (lathes...
If I can Chuck in lathe I use a dowel (broom stick) and sanding cloth/paper. I use 320 grit but can buy 600 grit. You can find 3,000 grit but...
I have Use a brake hone . It works the only drawback is it slow.
I would use a reamer first then use the brake hone.
The other is very slow...
It not hard to ship It may take 6 to 8 weeks.
The tools will need a ply wood box.
I have use 3/4" [19mm] ply wood and 2 x 4
All use made South Bend lathes are more taper
The size I think is #4 Morse sleeve to #3 Morse
Not to make or buy I use a sleeve 2 to 3 morse from...
To weld you need to per heat very hot
I have used 12L14 works great
I would go with 8" more space for setting up
Marry Christmas from Clovis California
I like no casting
Never seen that I have run single and three phase lathes.
If have bad bearings out of balance motor may give you a bad finish but this true with...
Build a rotor phase simple
When my shop I did both
Look for shipping company
As time goes you same shipping company for other tools too.
Most stores that sell lathe will box the shipping and use...
I use cast iron weight
There are some places that sell cast iron bar stock with high price but very good stock
From McMaster Carr a bar 2" OD...
Here place sell 4-36
Odd are it old thread
Taps are still made
For my pumping work I use AC type silver solder it melts at higher temperature.
I also for silver solder for steel it melts at higher temperature...
Separate names with a comma.