Did the cam housing. I will have to redo it. I did a dumb mistake when i took the G54.[ATTACH][ATTACH][ATTACH]
Did those little button this morning.
I guess i will get used to smalls parts ;-)[ATTACH]
Almost look like an engine ;-)[ATTACH]
Almost done. I have to do the small 0.050" oil hole tomorrow.[ATTACH]
Working on the case today. I'll try to make a little video without cooling fluid.[ATTACH]
No way!! ;-)
It Happen to the best of us!!!
CamGear done too. Wire EDM.[ATTACH]
So, i did the first step of the crank. I tried to do it one shot but i had vibration problems and i was not able to hold the part like i wanted...
Yeah, i did it one pièce, too much material to remove.
Crank is done but not good. I had problems with the second chuck on the mill turn and the part was scrap anyway. I did the other step on the dmu...
Yes, thats what i figured out.
He putted the carbs lower than the bottom tubes to avoid that.
Those who say it's easier on cnc, just dont know what they are talking about.
Idler gears. Wire edm.
Yes, it's the original geometry. I only removed some material around the holes.
This is the setup.[ATTACH][ATTACH]
I forgot to take a pic of the jig. I'll do it tomorrow.
You are right, I used that cutter to do the clearance for the link rods.
I also made a little jig to do the other side.
First side done.
Separate names with a comma.