Search results

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

  1. S

    1/3 Scale Ford 289 Hi-Po

    Wow! Just Wow!
  2. S

    Teflon as spark plug insulator

    You could have just said you thought it was too expensive Steve.:rolleyes:
  3. S

    Teflon as spark plug insulator

    Why would anyone use Teflon in a spark plug when this stuff is readily available? McMaster-Carr If that is too spendy, there is also this stuff. McMaster-Carr
  4. S

    Sodium Silicate for Foundry Sand

    Actually, at room temperature of 20 deg C it will be about 830 PSI.
  5. S

    Steam engine lubrication

    Hi Steamchick, I was following through your calculations, but there was one bit that I didn't understand. In this line: So this 7.6cu.in/min. of water = 7.6 cu.in./min. x 3.13 = 23.9lbs/.hour. Where does the 3.13 come from? I did it like this: 7.6cu.in/min x .033Lb/cu.in. =.251Lbs of water...
  6. S

    Ambitious ORC Turbine

    That makes sense. I was reading through your earlier posts and noticed you are planning to drive a turbocharger compressor with your engine. What happens to all that high volume/ medium pressure air from the turbocharger compressor?
  7. S

    Ambitious ORC Turbine

    I looked at the table, and I do believe you are interpreting the volume correctly. Are you planning to superheat above 183 C? Keep in mind that as the gas expands and cools, it will be dropping into the wet region under the "steam dome." At this point, some of your steam will have started to...
  8. S

    Ambitious ORC Turbine

    Hi guys! I've got to jump in here regarding PV=nRT. You cannot use PV=nRT when dealing with a Vapor according to my thermo book. This is why we use the Steam Tables. There is no simple mathematical expression for pressure, volume, and temperature when dealing with vapors. The vapor temperature...
  9. S

    Help with Mach3 and 4th axis machining

    You can take out G28 without any problems. G28 rapids all axis to their home position which I find can be kind of dangerous if you are unsure of what path the machine will take to accomplish this. Personally, I never use G28 for this reason. I like to use G00 Z4.000, or G01 Z4.000 F10 (if you...
  10. S

    Using a CNC Mill as Lathe

    That is REALLY cool! I gotta try this.
  11. S

    Small engine dyno

    Wow, it sounds like your to do list is as long as mine! I look forward to pictures of what you're up to. I've never tried using stepper motors for dyno brakes, it will be interesting to see how well that works. Do your turbines have proper DeLaval nozzles in them? If so, they may not use much...
  12. S

    Small engine dyno

    Thanks, I'm glad you liked it. I will be adding better instrumentation in the future so I can feed the data into a laptop, but right now I've got a big list of other things to do first. I would be happy to help whenever you're ready to build your own. Cheers!
  13. S

    Small engine dyno

    You guys have made some cool dynos! So far, I've found the easiest way to make a dyno is to use an AC induction motor as an eddy current brake. It is literally already made for you, and any AC induction motor will work. You simply feed DC to the windings to increase the braking effect. Here is...
  14. S

    aluminum 4032 piston material heat treatment

    Why not make the piston out of something that really IS heat treatable like 7075? I don't know if this would work, but it might be worth a shot.
  15. S

    Casting fun

    I've been casting aluminum, and some iron, in my backyard for years, and in my experience, degassing is rarely necessary. The main gas that aluminum absorbs is hydrogen which comes from incomplete combustion of your fuel. The trick is to fire slightly fuel lean. In order to do that, you fire up...
  16. S

    DoAll Bandsaw for Brian

    Hi all, Have you checked whether the motor needs to be wired in "star" or "delta" for the VFD you are using? That could set a fault. Also you want the motor and the VFD to be close together because long wire runs can set up weird harmonics that do bad things. I hope that helps. Cheers and good...
  17. S

    "Steam eater"

    Hi F.Wissink. I think sometimes it gets forgotten that this is a HOBBY engaged in for fun, self education, and a way to express our artistic creativity or whatever. If it doesn't work, so what! I personally have learned far more from my failed attempts than I ever did from my successes. Anyway...
  18. S

    First Fire

    Hi Bovine, Looking at your rig, I can see one problem. Your exhaust vent holes are probably too small. Don't forget that when you heat up air to 2500 F or so, it expands quite a bit, so you must allow enough vent area to get this "bigger" air out of the furnace or you will choke down the...
  19. S

    Need opinion on truck

    Hi Ranger, Sounds like the truck is a total basketcase at this point. Don't buy it. If you offer your friend $500 (way too much, this thing is scrap) he will be insulted because he paid waaayyy to much to get it back. They only made a bazzillion C-10 Chevys, so if your heart is set on this...
  20. S

    Sanding Glass Tube

    Hi Srdevil, I like to use a diamond whetstone like the type used for sharpining wood working chisles. The diamond cuts the glass much better than sand paper, so you can use lighter pressure. Plus the whetstone being flat and ridgid makes it much easier to get a flat end. If you go this route...
Top