Thanks to all.
Looks like I lucked out, I found ALL the issues of Strictly I.C. on E-bay that covers this engine.
Thanks for the email, I'll send them a note and ask.
The single vertical is what I'm trying to find.
Good day to all.
Was wondering if plans are still available for the engines???
In the shop early this morning and here are the results, Now I will need to do the same thing all over for the other cylinder.
I order enough...
Just a thought, but I made this out of a piece of Rail road rail, tempered is best I could by putting the whole thing in a wood cook stove and...
Did I say Long Term :big:
Still working on this, or should I saw would like to complete it!
today started on one of the Cylinders and Steam Chests...
Hey Ronald and Welcome.
I have built a couple of 10V and the 10H, both were built on the machines below.
I started the other rear bearing assembly, now I just need to find my bearing material for the insert. I also started on some of the many nuts and...
I found a little inspiration
Started to work on this project once again.
Part F-11 Rear Bearing, planes called for ½ x 1 Brass but I had steel on hand so I used it and...
So your the one,Glad it wint to a good home.
Your other Engine is on its way and I have inculded some Extra items hope you can use them.
I would like nominate this for Project of the Month.
Its a great looking lathe!
Thm: Thm: Thm:
What are you using to bend such nice un-kinked 90s in brass tube?
Man at this pace youre going to be blowing your safety before spring!
I have been watching this thread with Great excitement, and can guarantee that I nominate it for Project of the month when complete.
Here is another option.
I somewhat started this build.
This is probably a very unconventional way of doing things, but this is the First such rod I have ever...
Bogs, I think you hit the nail on the head!
Thanks Dave Great Link, this will keep my busy for the rest of the morning.
I'm not sure I agree with this. I'm thinking maybe you didn't quite mean to write it as it came across or I'm misinterpreting.
Separate names with a comma.