Search results

Help Support HMEM:

  1. F

    Stirling generator fan

    Hi all just a little update to my stirling fan now Powering lights. http://m.youtube.com/watch?v=tQ5LWou5evY
  2. F

    A fun engine

    Hi all, I decided to build something a little easier then usual with my 9yr old son who is slowly starting to understand my fascination with stirling engines hopefully some day to continue........ https://www.youtube.com/watch?v=Cp64S6f4uXY
  3. F

    stirling carbon moriya fan variant

    My latest build a variant of the moriya stirling fan runs nice and quite
  4. F

    Stirling coke can engine

    Hi all I posted this video on youtube almost a year ago ,along with a flame eater and various other engines most dont have many views but this has over half a million http://youtu.be/1QtO5jJyK5A If you want a good laugh sit back and read through the comments.....very funny Regards Jamie
  5. F

    Flame eater no plans

    Hi everybody I started on a flame eater I am building ,This project started when i found a nice piece of stainless hex which I wanted to mount at 45 degrees to look some way like a cannon......I am using a CI piston 26mm with a 40 mm total stroke ,The crankshaft is built up, I will silver solder...
  6. F

    Steam wagon

    I know this is not a full model but what a beauty I saw this at a show recently in Ireland Im sure a few people will enjoy this..... Jamie http://youtu.be/lGLs83PETF4
  7. F

    Webster 4 stroke first build help

    Firstly Hi to everybody here. I am going to start my next project soon the Webster 4 stroke the plans of which are freely available on the Internet http://home.comcast.net/~webster_engines/. My question is to anybody who may of had past experiences with this engine or similar engines. As this is...
  8. F

    Stirling 60 completed

    Hi i have just finished my latest build a Stirling 60 designed by Jeroen jonkman with some minor changes that i made . I found the plans for it in the downloads section of this site. I contacted him recently to tell him i have finished his design and it seems I might be the first to have build...
  9. F

    Brass Stirling 60 help

    Hi everybody greetings from Ireland I have been slowly building the Stirling 60 the past few months which I found the plans for here http://www.homemodelenginemachinist.com/index.php?action=tpmod;dl=item270 My question is regarding the linkages and dimensions from the flywheel to both the...
  10. F

    Mechanical Device

    HI I have a little spare time to make a new project .My last two projects have been a stirling and a vacuum engine. I was trying to think of something else i could build for a change with mechanical motion like a Perpetual Motion Machine but i dont know what anybody with ideas, Kind Regards Jamie
  11. F

    Vertical Vacuum engine finished!

    Here is a video of my completed Jan Ridder flame eater with and without piston all minor issues like sticking piston etc have been resolved hope you enjoy http://www.youtube.com/watch?v=zn3WnQPFB0Y
  12. F

    Steam help

    Hello everyone Model Steam engines, I want to build a steam engine as my next project not to small not to big . My previous experience with steam is non existent. I will follow all safety procedures pressure testing etc but I want to run on steam and not air anybody know a good starting point...
  13. F

    Polishing flat aluminum

    Hi All I have a question regarding polishing Alu, I have no problem getting a nice shiny surface finish on the lathe polishing round but on flat stock following the same procedure going up thru 400 600 800 1000 1200 grit emery and then finishing lapping with diamond paste and oil on some paper...
  14. F

    Jan Ridders Vertical Flame Eater

    Hi everyone and happy Christmas I was hoping to get the proper base made before Christmas but I just don't have the time, Here is a little video of it from starting up,There is more info in the thread below.'coming along nicely' http://www.homemodelenginemachinist.com/index.php?topic=11674.0 I...
  15. F

    Stirling Fan with Flywheel

    Hi Just a short video of stirling engine a friend of mine made, He originally got the plans from and old book I'm not sure what the name was,The cylinder and displacer are both aluminum, The original fan blades he removed and made a bronze flywheel just to make it smaller for his shelf.
  16. F

    Brass or Bronze

    Hi everyone I have a question about a brass cylinder which i made for a flame eater some of you may already have read how I learned from listening a little to late. But my question this time is while somebody was looking at my little engine they were convinced i had made a bronze piston and not...
  17. F

    Coming along nicely

    My half built flame eater waiting for me to finish. Cleaning and polishing will follow later
  18. F

    Brass or Cast iron

    Hi everybody I am reposting this question, if anybody can help me decide before I start making my piston and cylinder for Jan ridders Marc vertical flame eater. I will be starting these over the weekend. My question is this I am planning to make my piston from cast iron but I am still undecided...
  19. F

    Brass or cast Iron

    Hi everybody I am reposting this question, if anybody can help me decide before I start making my piston and cylinder for Jan ridders Marc vertical flame eater. I will be starting these over the weekend. My question is this I am planning to make my piston from cast iron but I am still undecided...
  20. F

    help uploading a picture

    Hi i want to upload a few pictures of a flame eater i am building but i dont know how,I uploaded 2 on flickr so i have a url but it still wont work any help would be appreciated
Top