Search results

Help Support HMEM:

  1. S

    How to attach a sight glass?

    Excuse me Please, but what is a "Glass carbochon"? Never Heard that before and even Google cannot translate it.
  2. S

    Mini diesel engine.

    You can try to email him, but i know that He won't give out any Kind of technical Information or Plans. He said this several Times in his Videos, which are very hard to understand, because his englisch speaking sounds very "danish ". So you have to watch his Videos a couple Times to understand...
  3. S

    Mini Oilcan hand operated

    Hi together Once again, Thanks for your fine comments. As i already promised, i made Plans from this Oilcan for you to download and build one. The set of Plans is free for your personal use and contains 10 sheets of 2D and 3D drawings and the Build instructions. Hope you find this useful and it...
  4. S

    Project of the Month - January 2017

    Thanks very much for the nice Comments and making my Oilcan to the Project of the Month.:):cool: As promised i finished the Plans and Building instructions. You can find them for download in the Build thread.:thumbup: Stefan K.
  5. S

    Mini Oilcan hand operated

    Thanks all for your replies. I´m glad you like the Oilcan. I don`t know when, but i will draw a Plan for it. When it`s finished i will post it here and publish the Plan. The dimensions of the body and the lid are not critical at all, but look better the smaller they are. But there are the...
  6. S

    Mini Oilcan hand operated

    Hi together Happy New Year 2017 to all readers, builders and people here! I just finished a little Project from which i saw a picture on the internet. Some of you might have seen it on Find Hansens website. I couldn`t find any further Information about it, so I started to build it from...
  7. S

    Tiny I.C. finished

    Hi This little sign is a Casting made of Brass. I soldered a holder on the backside and painted it red. After drying, I sanded off the excess paint to bring out the upstanding Brass. The sign itself was ready available in a model railroad-shop.
  8. S

    Tiny I.C. finished

    Hi This little sign is a Casting made of Brass. I soldered a holder on the backside and painted it red. After drying, I sanded off the excess paint to bring out the upstanding Brass. The sign itself was ready available in a model railroad-shop.
  9. S

    Vapour carburettors

    Hi Andy Yes it means the engine will lack lubrication. In case of a Nitro engine I would not recommend a Vapor carburator, because they need between 10 and 15% of oil. Vapor carbs a mostly used for gas engines not running unter load or high rpm's. In case it's a Nitro engine I would always...
  10. S

    Vapour carburettors

    Hi Andy The Vapor carburator will work with Nitro fuel as well, because the working principal is the same. And yes, you are right , the dissolved oil in the fuel is left behind. Only a very small amount of oil gets, beside the fuel Vapor, sucked into the engine. Stefan
  11. S

    Another try to build an engine running with diesel fuel

    Alex Too sad that you gave up. I am convinced that you were very close to a running engine
  12. S

    Tiny I.C. Engine

    Hello Jim Thanks for your nice comment. :) I have all my information about the Vapor Carburator from Jan Ridders Website. I think he invented the principle of this carb. Here is the link to his website: http://ridders.nu He lives in the Netherlands and is a very nice guy. You can see many...
  13. S

    Another try to build an engine running with diesel fuel

    One more thought! The differential pressure between the combustion chamber and the fuel pressure must be very high. Otherwise you won't get any spray inside the combustion chamber. I. E. If your compression pressure inside the engine is let's say 20 bar and your fuel pressure is 25 bar, the...
  14. S

    Another try to build an engine running with diesel fuel

    Hi chicken Maybe the amount of fuel that is injected is still too much. Try to reduce the stroke of the injection pump. As a guide line look at the injection pump that Hansen uses. It's very very small. And that has a reason. Where are you from? Stefan
  15. S

    Tiny I.C. finished

    I wanted to show the finished Engine in the Build thread but i found the thread is closed. So i post the pictures here. My finished Version of the Tiny I.C. originally designed by putputman. The engine has no classic carburator. It runs on gasoline Vapor instead. The speed can be adjusted by...
  16. S

    40 cc longstroke Engine

    @kadora I know the guy who made the castings. It's a friend of me. We often build together. His name is Jürgen Bärenz as Werner already said. If you are interested please send me a Pm. I can make contact for you.
  17. S

    Tiny I.C. Engine

    Hi Here's a little update on the progress. I decided to build the Tank and post a picture rather than drawing it first. I also finished the exhaust with the flap. These little parts took me almost a day to build them. Stefan
  18. S

    Tiny I.C. Engine

    Hi Gail Thank you very much for the nice drawings. I appreciate sharing the drawings and i`m sure they will help me a lot. I´m just brooding here about how to design the Tank/Vapor Carb for the Tiny. Have to keep in mind that the Carb needs about 15 to 20 cm² (gas)surface to work and vaporise...
  19. S

    Tiny I.C. Engine

    Gail That would be nice. Thanks a lot. I still have a lot of work to do on the Tiny to make it look good. The exhaust flap is one of the latest things i can do. Stefan
Group Builder
Top