Search results

Help Support HMEM:

  1. Rodrigo Castellanos

    Another ML Midge

    Hi Ed! i just finished my Midge and seems to work ok. no issues, starts easy once needle settings found, but it like to be exhaust prime for fast start... here a short video of mine... can you share the mods (transfer ports, placement and that stuff) will be great to build one like...
  2. Rodrigo Castellanos

    2 Mills 1.3cc MK1 building

    Yeah! Both become goooood runners!
  3. Rodrigo Castellanos

    2 Mills 1.3cc MK1 building

    here the pics...
  4. Rodrigo Castellanos

    2 Mills 1.3cc MK1 building

    hi guys! after my partial success with my scaled down Mills, decided to go full size... having a nice casting made by Jef Lemmans, decided to make another case fully machined....
  5. Rodrigo Castellanos

    Weaver 1cc Diesel engine

    Hi Ken!!! Yes, seems like the engine wants to run... after those short burst, noticed a lot of black oil in the compression lever.. so contra piston is not sealing well.... i made a new one and will give it a try soon. i have some kind of small leak in the crankshaft too, as same oil can be seen...
  6. Rodrigo Castellanos

    Weaver 1cc Diesel engine

    hi Ken! well, still working on... the engine wants to run, but noticed a lot of oil and bubbles over the head... so my contra piston was loose... so today i made a new one... anyway, i´m pretty happy as i been learning a lot, and working with that kind of tolerances are very fun and...
  7. Rodrigo Castellanos

    Weaver diesel plans

    hi guys! think i had send all request, if someone is missing, please let me know at [email protected]
  8. Rodrigo Castellanos

    Weaver 1cc Diesel engine

    Well, the engine is ready and next is test run. after some trouble, I needed to make a new contra piston and a thicker conrod...
  9. Rodrigo Castellanos

    Weaver diesel plans

    hi! plans sent. Cheers
  10. Rodrigo Castellanos

    Weaver diesel plans

    hi! Plans sent.
  11. Rodrigo Castellanos

    Weaver diesel plans

    can you give me you email? Cheers
  12. Rodrigo Castellanos

    Weaver 1cc Diesel engine

    Hi Mauro! MAPP for sure can be used, (i did) but after more than 10 minutes of heat, the scrap pieces did´t reach the right temperature.. The learning is part of the fun! Cheers Rodrigo
  13. Rodrigo Castellanos

    Weaver 1cc Diesel engine

    Hi Guys! After many attempts to solder the inlet boss with no luck using my Mapp torch, decided to went with and old man (94 years old) who have a plumbing service shop, with amazing old tools all around the shop, and ask him if can help me to solder this thing... he said "i don´t use silver...
  14. Rodrigo Castellanos

    Weaver 1cc Diesel engine

    HI BILL! today i gave it a try with no luck..... seems my silver soldering is a hi temp and my Mapp torch has not enough temperature... :(
  15. Rodrigo Castellanos

    Weaver 1cc Diesel engine

    time to make the boss inlet, with good luck the cylinder have the same diameter as my mill bit! and seems to have a nice fit! time to get some silver soldering and hope everything goes ok as never done before!
  16. Rodrigo Castellanos

    Weaver 1cc Diesel engine

    hi Guys! some more work done today. now looks like an engine!! the cylinder flanger is done as well as the inlet. Having no rotatory table or Split saw, decided to make my exhaust ports as the inlet... just 2 at 180 degrees.... hope they work
  17. Rodrigo Castellanos

    Weaver 1cc Diesel engine

    Hi KenC! What a nice engine you build! sorry about that pic... was what i found on google ... that pic was very inspirational and was the one to help me to decide to build one. again, my apologies. Rodrigo
Top