Plenty of info in this manual
Love it. Such a simple solution.
Just one word to describe. Sensational
This is a Lister one so you can see the idea. [IMG]
Nothing at all wrong with the dipstick idea. I recall some of the old engines just used a filler with a small resevoir with a level...
I thought rocking couple was more a flat four phenomenon.
If you are trying to increase the diameter of .125 dia rod to .2 dia for a thread then you will need to upset around four times the final length...
That sounds like motorcycle size (apart from the length) Maybe your local bike shop can help with custom spokes,
Machining the Benz
I have been going through import problems recently albeit different continent and different carrier.
I agree that a flow chart would be useful for...
Watching with interest. Carbs have been the most problematic for me.
Even assuming you get it at a bargain price, unless you really really want it, you would be better putting your hard earned readies towards...
Was it this one. https://www.homemodelenginemachinist.com/threads/a-new-ignition-circuit.20415/ I've built a few of these and they work fine.
Out of curiosity I did a bit of digging and both products are Prussian blue based.
Layout blue is Prussian blue mixed with alcohol
That works really well. Great job.
The sharpie is OK for marking out but not to replace High spot which is the same as Micrometer blue. I had some for years and it was OK. Maybe...
I bought a chinese vice off amazon because I needed a better vice for the drill stand. I dont know if I was just lucky but I was amazed at the...
Separate names with a comma.