It looks like a new spin on a Clerk cycle engine, or reid two cycle engine.
The evaporator is hooked to the charging cylinder and is connected to...
.125 is a bit narrow, Aluminum 7075 is a great candidate for you application.
As was mentioned, a wider face would be a good idea.
When you are turning, bronze will chip, brass will not chip as readily. Brass can string or curl before breaking off.
Wesley, Can you give some information on the requirements for this gear?
(A light Alloy)
What is a light alloy???
Again, If you are referring to Aluminum, there are many grades of aluminum.
Different grades of...
Ether will work just fine. If you are asking about aluminum and steels.
Are you referring to Aluminium, when you say alloy?
Alloy is a...
Position not to ?
Part not to ?
You should have good resources there in the UK to Guhring drills, they are very good quality.
You should have access to a number of good quality...
Very nice looking engine, :):)
Keep on throwing chips!
Looks like a Marvelous idea, You could easily make your own.
I think, that is a good use for my Atlas bench top lathe.
Graphite will withstand extreme high temperatures, is stable at high temp. no need for lubrication.
The use of oil in a stirling is not good....
First off, in your situation you first need to check your motor for wiring options.
If you can not change wire configuration, you...
I have built many rotary converters, they can be simple or they can be more involved.
Another solution for you to consider, if you are in the...
fantastic! You Sir, are very patient and persistent.
It is great to see what can be done, With the equipment that you have a available...
Sorry, I didn't notice the video at first, I was just reading.
Greetings, Being your battery is a ni-cad, it is older and lost it's capacity. I know all of my ni-cad cells capacity is almost gone....
I believe Wayne Grenning, uses a mix of gasses. Like hydrogen and another gas.
You can look up Grenning engines, to contact him or go to Smokstack...
Steve, Can you direct me to information on this show, I can't find the information for location and dates.
I don't think that it would be very durable for long term.
Yes, wood is good, hard maple, hickory something hard and straight grain. I like using phenolic material too, very durable.
Separate names with a comma.