Quantcast

Search results

Help Support HMEM:

  1. Richard Hed

    Experimental Flash Steam and others

    Hey guys, have you seen Jeremy Fielding's vids? You might be interested in his utub stuff. I am watching his vid on treadmill scrapping. I got a treadmill motor, but failed to know tha tI should have gotten the electronics too.
  2. Richard Hed

    High speed drilling, sensitive drills?

    There are 1/8th" center drills, which can be used to just put a dimple on the piece. This will center it perfectly fine.
  3. Richard Hed

    retiring to machinist

    You are absolutely right. Not only that, but it is downright DANGEROUS to have cold feet and legs when old coots like you'all, are standing relatively still for a long time. Blood clots and other bad things can happen. For youngsters, this may or may not be true also, it may contribute to...
  4. Richard Hed

    Some ideas on it's worth.

    For NSW it might be a fair price, as I believe Australia might have a supply problem for lathes, but here in the USA there are many lathes for sale, which drops the price. Of course, you may be speaking of $AU not $US. But in $US, I would be inclined to 300$US. I wojuld be too suspicious of a...
  5. Richard Hed

    High speed drilling, sensitive drills?

    Let me be sure that I understand you. You say you are drilling a .25mm hole with a lathe? your lathe is a toy lathe? I would thimpfk even a toy lathe would be too clumsy to try this with. I would thimpfk a dremel type tool would be needed. You could set that up in your lathe but to use the...
  6. Richard Hed

    The Modular Tower Engine - a new, experimental design

    I know how you feel. There should be a law against work interfering with hobby. Also, understand about those projects being planned for years ahead and never getting it done.
  7. Richard Hed

    Some ideas on it's worth.

    If you could get better photos, especially of the ways, I could give a better answer. With all the rust, of course, whomever gets it, there will be lots of work cleaning it up. Also, knowing exactly what tools come with it, would give a better idea. I notice inthe background there are some...
  8. Richard Hed

    retiring to machinist

    Be sure to look into rocket-mass stoves for heating and cooking. It is best to plan this before you build.
  9. Richard Hed

    Ageless 9 and 18 Radial

    I am not familiar with Ageless. Is it IC or steam? It's good lookin'
  10. Richard Hed

    Model generator build from scratch

    That's totally beautiful. Can we see it run?
  11. Richard Hed

    Single Depth of Thread for 26 TPI

    There are two methods one can use: the trig method and the Pythagorean theorem. Ultimately, they are exactly the same thing which can be proven mathematically but the Pythagorean theorem is easier to use. Knowing that an isoceles triangle has all three sides being equal makes this very easy...
  12. Richard Hed

    1" Bore x 1" Stroke Vertical i.c. Engine

    What does your butcher--I mean, doctor say about glucosamine? It helps me a little, maybe not enough but a little. I workt last summer in the harvest in which when I was driving the harvester, I was always gripping two objects: with left hand, the steering wheel; with right hand, the...
  13. Richard Hed

    Corliss Steam Engine (Coles Power Models)

    How big is Agnes? Any more photos?
  14. Richard Hed

    Selecting a first engine to build.

    At this time I would be willing to take a quarter of it hands down, but one never knows about later. I could imagine uses for more later, but projects take a long time.
  15. Richard Hed

    Selecting a first engine to build.

    Ah, thanx. I live about 1-1/2 hours from Seattle. It's possible to go there to pick it up. I'll look up the location
  16. Richard Hed

    Selecting a first engine to build.

    I thot I had seen something cheaper, but on a search found that this is about 1/3 the best price I could find elsewhere. Unfortunately, If you don't want the large amount, you will over pay for the little bit you want. Don't forget, hyou will proably want more later. so, if you can go in with...
  17. Richard Hed

    1" Bore x 1" Stroke Vertical i.c. Engine

    I never considered it bull, but I definitely wasn't sure what it was or how it workt, but I have had similar miraculous results. Does not work for cancer, I thimk it will not work for arthritis, but not sure.
  18. Richard Hed

    1" Bore x 1" Stroke Vertical i.c. Engine

    If you have carpal tunnel, you may wish to consult with an accupucturist. Accupuncture Might help, but if it is arthritis, I thimk it would not help.
  19. Richard Hed

    Lathes

    Yes, it's true, ANY lathe is better than no lathe. I've been saying the same thing bout my little Enco, it's a piece of krap but compared to no lathe it's a Diamond. I managed in January, however, to get a REAL lathe and it's really like a Diamond, cuts like butter, accurate and so on. W/ LH...
  20. Richard Hed

    Lathes

    Oh, yes, You are right, I was thimking of some other mags.
Top