Search results

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. Stefan-K

    Another European "Hoglet-V2" is finished

    I used the one way bearing that you see in the attached Picture. The inner diameter is 8 mm, the outer is 12 mm. Bought it at Ebay and payed 3,99 euros a piece for it. And i put a ball bearing on each side of it, just to support the whole construction. And yes, the shaft is hardenend.
  2. Stefan-K

    Another European "Hoglet-V2" is finished

    So, what is a "Sprang-bearing"? I can`t find a translation for it, not even Google can.
  3. Stefan-K

    Another European "Hoglet-V2" is finished

    Hello Guys Thank you very much for the nice comments. I appreciate that. Sure i can give more detailed information about the Kickstarter and the Ignition system that i made. The Kickstarter is mostly made according to the Plans from Randall Cox. I replaced the no more available so called...
  4. Stefan-K

    Another European "Hoglet-V2" is finished

    Hi all together I`m presenting my fresh finished "Hoglet-V2" Engine, another one Made in Europe. This Engine has Cast iron Piston rings, Aluminum Pistons and a precision steelpipe (no hydraulic pipe) as Liner. All parts were made according to the Plan from Randall Cox, except the parts which...
  5. Stefan-K

    Flathead hit and miss engine???

    Brian I would Encourage you to make a valve in two pieces. I always make my valves this way with good Results. Give it a try. Stefan
  6. Stefan-K

    O Ring for piston rings

    First of All, short runtimes! And enough oil in the fuel mixture.
  7. Stefan-K

    Tests of CDI Ignition Modules

    Gentlemen I wonder what this thread is about. It started good as a thread about testing CDI devices. And Now it drifted away to a philosophical thread about the natural wonders of the Universe and the mysteries of Electronic in specific. I thought it could be of interest but Now im out.
  8. Stefan-K

    Tests of CDI Ignition Modules

    The Metal parts of the elbow cap as Well as the Metal "shielding" around the sparkplug wire is the only ground connection of the whole CDI ignition. RCexl and most of the other manufacturers build it this way. If you remove all that and fire the ignition you will most probably kill it, because...
  9. Stefan-K

    Honda GX160- 8.5cc

    Runs and sounds like the Real engine! Superb modeling, fine Details, very Well done. Congratulations. Stefan K.
  10. Stefan-K

    Model Engine Ignitions

    Hi Ray I would prefer Option 2.Checking All the boxes by dragging the cursor over them and change them all with one click. In real life one will Not change These numbers too often. So it should be done quick and easy. Good work! Keep on.
  11. Stefan-K

    Model engine CDI easy and cheap

    Really?? What a comment! "Go to Hobbyking and buy one"? I believe you didn't get me. It's not about just having or buying an ignition. But anyway, i stop talking about this now, knowing its another worthless comment. Nothing But warm air......
  12. Stefan-K

    Who is it on this forum that sells small engine plans?

    Johan The last post is over 14 years ago. So you can expect that the promoted Website has deceased a long time ago.
  13. Stefan-K

    Model engine CDI easy and cheap

    Hi Giel The Links to the Websites you Provided are already ancient. And so are the ignitions. And most of the members here should already have seen them. Either they are way too big to fit in a Model engine or they simply dont have what has already been discussed here. Im interested in the...
  14. Stefan-K

    Mini diesel engine.

    Pirmin! Komm lass gut sein.Nicht aufregen. Du hast ja recht, aber es nützt nix diese Deppen hier zusammenzuscheißen. Das kapiert die Sorte von Leuten eh nicht. Ich hab auch schon was gesagt, hat aber auch kaum Wirkung gehabt. Am besten du ignorierst die, das ärgert sie am meisten.
  15. Stefan-K

    Mini diesel engine.

    Hi together I also built an Injection pump for a small Diesel engine. I used the dimensions that Hansen told in his Video. So its very small. I can Tell you that any Kind of o-Ring, be it Rubber or plastic does not work at All. It can not withstand the necessary high pressure. I could reach...
  16. Stefan-K

    Honda GX160- 8.5cc

    Hi Basil Congrats on a very well done, cool Looking and smooth running engine. I am more into building "Old Iron" Engines with big Flywheels, but i know how much work it is, even with the help of CAD and CNC to create an engine like this. My respect! 👍
  17. Stefan-K

    Mini diesel engine.

    Cool! I totally agree.
  18. Stefan-K

    Mini diesel engine.

    Well, i'm pretty sure its not only my enjoyment of the site. I'm not the only one.... I think it would be much easier for all here if the Posters would stay at the thread theme. This is a Model Engine maker forum and that's exactly why i'm here. If i would like to read about the" life adventures...
  19. Stefan-K

    Mini diesel engine.

    I totally agree! A lot of Bla Bla about Things that have nothing to Do with the original thread. Sadly you find this behaviour more and more on this forum.
Back
Top