Quantcast

Search results

Help Support HMEM:

  1. bmac2

    Filament Splicer

    Thanks Andy Yep the case is printed. I lucked out when I built my printer that the CAD program I’ve been using for years exports STL files so zero learning curve on that end. I also found out that the only thing I hate more than flat square boxes for projects is cleaning out support material...
  2. bmac2

    Filament Splicer

    Patience is a virtue but I’m having to be patient with so many things already with all the shut downs I decided that I didn’t want to wait for Canada Customs to decide if my IC sockets where safe to allow into the country. The last order I had coming from China was returned because the...
  3. bmac2

    Filament Splicer

    Hi George thanks for stopping in. I used a 12v 40w heater cartridge and a 3940 100K NTC thermistor. Both are basic hot end replacement parts and I had some left over from a 3 pack I’d ordered when I built my printer. The heater is switched with an IFR640 MOSFET and the fan is just on a 2N2222a...
  4. bmac2

    Filament Splicer

    Hi Andy I have to admit that it’s a bit of a solution to a problem that isn’t much of a problem. The only real practical use I can think of for it is to use up the left over short lengths at the end of a spool. But it’s kept me entertained and given me something to do for a couple of weeks...
  5. bmac2

    Filament Splicer

    We’ve been in “social isolation” for going on a month and all the interesting stores are basically closed. It’s also been unseasonably cold and we still have about a foot of snow in the yard so I needed a project. The other day I was printing a new enclosure for my engraver and this was going...
  6. bmac2

    Hello from New Brunswick, Canada

    Hi from Alberta. Welcome to the forum, I think you’ll find it a great place for inspiration and help with frustration. New Brunswick. Damn now I’m craving a good clam boil . . . . . and its winter . . . . and I’m 4000km away.
  7. bmac2

    Software in the cloud

    Gordon I started out with a copy Generic CAD that came on 5 ¼ inch disks then upgraded to Gen CAD 6. When I bought a copy of Via CAD I think it took me about a year before I finally stopped using Gen CAD completely. It was a steep learning curve and I kept running into situations where I’d start...
  8. bmac2

    Old School Sawmill Edger

    Very cool assembly (again) Brian. You’ve inspired me to give it a try and make my own gear reducer for a sand muller I’ve been thinking of building. If nothing else I guess I have 3 months of winter to play with the idea.
  9. bmac2

    Foot Switch

    My printer is DIY so it came with NO manual and NO tech support. Hence I keep notes. https://www.homemodelenginemachinist.com/threads/3d-printer-build.30991/ I went through a good chunk of the 10m sample of PETG I bought getting things dialed in but the stuff is very durable and wear...
  10. bmac2

    Foot Switch

    “hours?” I found the adapter on Thingiverse and thought it was a cool idea. Copy, paste, slice, print, done. Granted a flashlight can be replaced by a table lamp but when I already have supply, multimeter, scope, freq counter, function gen etc. probes running all over the bench the last thing I...
  11. bmac2

    22 mm push buttons

    Try searching 22mm switch bezel
  12. bmac2

    Foot Switch

    The place I get my filament from has 10m sample packets for $2.69 CAD. Great for when I want to try something without having to commit to buying an entire spool. PETG can get very stringy so ramp up the retraction and doesn’t work well with supports as EVERYTHING sticks. The way I work around it...
  13. bmac2

    Foot Switch

    Cogsy, I’m not sure but I think that’s about the same return as I get on my savings, after the banks service charges.
  14. bmac2

    22 mm push buttons

    Hi Gordon Just did a search on 7/8” lock washer (22.22mm) and it came up with dozens, I got similar results with a 22.22mm search.
  15. bmac2

    Foot Switch

    I have (had) a foot switch that I don’t use often but I do like it if I’m using my little tankless compressor with my airbrush. The other day after using it when I unplugged the compressor it shattered like glass and the socket pulled right out of the base. When I took it apart I noticed a crack...
  16. bmac2

    Werowance builds a webster

    Werowance great stuff and welcome to the “holy crap I made a gas engine . . . and IT RUNS!” club.
  17. bmac2

    Epoxy Syringe

    I can’t remember exactly when it was that a marketing guy decided that the average consumer wasn’t smart enough to squeeze out equal amounts of epoxy from two separate tubes so they started packaging it in the dual syringe style that in some cases is all that’s available. The idea was...
  18. bmac2

    3D Printer Build

    Just an update on the printer. I think I found the problem I was having with keeping the bed level. I noticed that the loops and brim on the prints where thin to the point of being transparent. Parts where sticking to the bed so hard that I had to use a lot of force to break them free...
  19. bmac2

    3D Printer Build

    XT, Don I think I have my post nozzle drip settled. Part of the problem was I’d been poking around with the “end” G-code and inadvertently deleted the M104 command to turn off the nozzle at the end of the print. Also I’d calibrated the extruder but I hadn’t checked the filament and my 1.75mm...
  20. bmac2

    Using supports

    Hi Chuck your case looks similar to the one Olsson (billanygard) posted for his controller back in the “Arduino Rotary Table for Dummies”. I haven’t messed around with supports (yet) but if you drop him a PM he would probably be able to help you out.
Top