New threads and interesting conversations directly in your inbox. Sign up now and get a daily summary of the latest forum activities!
Not yet Ray. Doing the spring clean up thing. I'm getting some work done on the house and other stuff
Planning to get in the shop tomorrow.
I was also thinking of making a step to stop the drive washer and key it with a 1/16 pin
I think I'm going to use a tapered pin reamer for the front. 5/0 looks about right. I really don't want to deal with the 7-1/2 deg hole in...
Thanks, I've been trying to get to the shop. But things where a little buzzy
Hi gbritnell ,
EN16T is for the the crank on the Whitttle, I would suspect 4140/4142 or in that neighborhood.
Good to be back.....no pun...
Thanks All for the many well wishs
The back is much better. I'm going to give it another week, I have to take the 6" RT off the mill. I think...
Let me intice you :big:
I added the DRO and now I can't live without it
I'll be the last to talk you out of it. Love my Grizzly.
You just need to learn how to cut the other way! I don't think I could cut inside...
A fine bead blast will erase all of the solder.
I have a 10 x 22 Griz. I can't help with the reversing. Have you looked at the Griz site and the on line manual? Parts manual?
If you need...
Very Nice Brian,
I'm waiting on the vid too!
You kept the receipts? You never keep receipts in a hobby
You don't want to know :big:
Many years ago we used propane from a tank the same as the one on your BBQ to fuel model jet engines. We had a special hose for the occasion.
I won't be posting for awhile. Doc said take it easy on the back. Things got worse and worse. So I'm on med's but it will take a...
"Chips are chips and turning is turning."
I learned how to turn on my dads lathe when I was 10
Nothing like turning wood sometimes. Never know...
I have no seats on my Coles H&M and no plans to put them in the Whittle, There's just a 45deg face cut into the Alum. Your right these...
High speed needle is the long one. I forgot to mention earlier that you need to adj the long needle 2-1/2~3 turn out from bottoming it all...
Those carbs have a low and high speed needle. Low speed needle adj.....when trying to accelerate engine just dies...to lean
Live center point turns with the work
Dead center is just a point and will need plenty of oil when you turn
And of course you know...
Jim, That's Gorgeous :bow:
sbwhart Thanks for that link. Google Whittle V8....there is a utube vid
tombstone Very nice. Your getting way ahead of me. I haven't seen the...
Separate names with a comma.