I cant find a PM button ? but would be very interested if you could email me a copy of the plans, firstname.lastname@example.org
Nice work Chuck
I found some more pictures of a Maudslay here...
Thank you , that makes it clear
Is it important how far the end of the jet is from the air holes and if so how do you
work out the right position?
Its really good to hear you are making a return.
I followed your posts a lot in the past and learned a great deal from reading them
yes single and double acting oscillators
Glad to be of help. If you just change one number at a time you will soon see how it works
You may find this usefull for what you want to do , I did
Firstly , Thanks everyone that replied
I just found a site http://www.had2know.com/academics/spherical-cap-volume-surface-area-calculator.html...
Well I'm not trying to be difficult but no , not really.
Yes I can follow your numbers but I just dont see why you use...
Just what I was looking for thank you
Hi Thanks for replying.
Forgive me for being thick, but I dont see how that gives me the answer
To make a full round head I need to have enough...
No, not a question you cant leave alone, but a question about riveting
I am about to try riveting for the first time and I will be using 3/64"...
Just to let you know
I conected it up with a 24V PSU an MSD 415 Driver and a nema 23 stepper.
Its working perfectly on both the Arduino Uno and...
Torfilli and Rod
Thank you both so much for not giving up on me , I am pleased to say I now have it working :D and also using Torfillis file I...
Hi Torfilli , thanks for your help ,I'm sorry to be a nuisance but I think I may be going insane ,( thats not unusual at my age )
I removed my...
I too use a copy of a sainsmart LCD and my left button doesnt operate as it should
I had the same problem with Chuck Fellows code...
Thanks both for the excellent answers
It was just after asking Rod if it was direct drive that I felt a bit silly because
I realised that with...
A quick question for rodw
When you used your code with the 90:1 rotary table what gearing did you use between
the stepper and the RT ? was it...
Separate names with a comma.