Many thanks ordered
Please could any body send the link so as I can get the plans for the Mill 1.3 cc engine, I have tired many many places with no luck
Wow thanks for that will check it out.
Being a very long time aero modeller I was looking at the transfer ports on a OS61 engine and there are...
Looks good but it running slow. Is there a reason for that, running in??
[ATTACH] Now sporting a silencer!!!! Must change the 3mm bolts for mushroom heads!!
[ATTACH] made a new head today, thinks it looks better!!
Video on you tube search for glow engine 3.2cc[MEDIA]
[ATTACH] [ATTACH] [ATTACH]
At last it’s finnished starts and runs well, still a bit tight so running rich trying to Load video but to high res
Long time aero modeller turned engine builder
It’s two rich mixture on idle and it’s not two stroking, you need to lean it out so it runs faster. But not for to long with A fly wheel, it...
Thought that was the problem
Bit more done today, all day doing crankshaft and propdriver!!!!
Remove glow plug and connect battery it should glow bright orange. I think the fuel going in to engine might be blown out though front bearing...
The way the fuel is going into engine isn’t your problem. You are losing crankcase compression through the front housing. Fit bronze bush to front...
You could fit bronze front bearing, lap crank shaft to it
Meant to add you can use the same carberretta for two or four stroke
You will need two stoke model engine fuel which is methanol and oil!!! 75%methnol 25 %castor oil it will run on this but 5 % nitro will help it...
Hi thanks for the info, perhaps my next engine
[ATTACH] [ATTACH] [ATTACH] [ATTACH]
Have made a start, bucket full of swarf later!!!
If you could send p d f on 10cc engine would be great to email@example.com. Many thanks
Separate names with a comma.