bigal2749
Well-Known Member
- Joined
- Aug 4, 2008
- Messages
- 60
- Reaction score
- 4
I've run into a brick wall in my attempt to get a small Carlisle Finch 1/4 hp engine running. :'(
Been on the search for a lunkenheimer 1/2 inch carb or an Essex 3/8 carb(which is what I believe was used in 1915) but no luck.
So Plan B is to make one.
Does anyone have plans for a model carb? Probably one of the larger sizes (for a model) since this little Carlisle has a relatively large bore of 2 1/2" and 2 1/2" stroke.
If I find plans but for a very small model can the plans just merely be scaled up to fit?
Regards Al
Been on the search for a lunkenheimer 1/2 inch carb or an Essex 3/8 carb(which is what I believe was used in 1915) but no luck.
So Plan B is to make one.
Does anyone have plans for a model carb? Probably one of the larger sizes (for a model) since this little Carlisle has a relatively large bore of 2 1/2" and 2 1/2" stroke.
If I find plans but for a very small model can the plans just merely be scaled up to fit?
Regards Al
