New Tool Holder.

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Tony Bird

Senior Member
Joined
Feb 20, 2011
Messages
822
Reaction score
895
Location
Cardiff, South Wales, UK
Hi,

Many years ago I bought an inexpensive Chinese/Indian Quick Change Tool Post which after some modification has served me very well. When bought it came with 5 tool holders and over the years they are all used up with tools that I use frequently. I haven't been able to source any extra holders band it wouldn't be too much of an effort to make some however I realised that two of the tools in the holders were tangential where the tool bits were adjustable so I decided to free up two of the tool holders by making dedicated tool holders for them. The machining was straight forward and attached are some photographs of the finished tool holders.

Regards Tony.

IMG_4010 LR.jpg


IMG_4012 LR.jpg


IMG_4006 LR.jpg


IMG_4007 LR.jpg


IMG_4009 LR.jpg
 
Nice work. Are the built to any specific print or are they constructed freelance?
 
Tony, I like the two holes in the tool holder which really reduces the overhang of a lathe tool that can occur.

Cheers and Thanks

Norm
 
Hi,

Nice work. Are the built to any specific print or are they constructed freelance?

Its freelance made to suit the lathe and tools.

Hi Ray,

Where can I find a tool bit holder like that here in the US?

If you mean the Tangential Tool it was supplied by Eccentric Engineering an Australian company which I believe has agents in the USA.

Hi Norm,

I like the two holes in the tool holder which really reduces the overhang of a lathe tool that can occur.

It is the first time I have done this and it seems to work well.

Regards Tony.
 
Am I suffering from 'something nasty, because I note a firm who sells a tool and cutter grinder either as, plans, kits or completed tools, then sells tangential tools and now is selling tee section parting tools and a jig to sharpen more conventional parting tool blades.

Am I mistaken or is there a reason?

Regards

N
 
Hi,

SCTP huh? ;-)

&

Am I suffering from 'something nasty, because I note a firm who sells a tool and cutter grinder either as, plans, kits or completed tools, then sells tangential tools and now is selling tee section parting tools and a jig to sharpen more conventional parting tool blades. Am I mistaken or is there a reason?

I am very sorry but I don't understand?

Regards Tony.
 
I simply think that a super abundance of tools from the same supplier which are supposed to perform the same task is somewhat eccentric.

I simply don't understand why

Regards

N
 
Hi Norm,

I simply think that a super abundance of tools from the same supplier which are supposed to perform the same task is somewhat eccentric. I simply don't understand why?

Well they are made by Eccentric Engineering. I have only just had a look at the American agent's web site, there does seem to be a lot. Possibly the apparent number is because the tools are offered in singles and multiples. The British agent who I have dealt with only show singles of Eccentrics products they also seem to be somewhat cheaper?

Regards Tony.
 
Hi,

Many years ago I bought an inexpensive Chinese/Indian Quick Change Tool Post which after some modification has served me very well. When bought it came with 5 tool holders and over the years they are all used up with tools that I use frequently. I haven't been able to source any extra holders band it wouldn't be too much of an effort to make some however I realised that two of the tools in the holders were tangential where the tool bits were adjustable so I decided to free up two of the tool holders by making dedicated tool holders for them. The machining was straight forward and attached are some photographs of the finished tool holders.

Regards Tony.

View attachment 93839

View attachment 93840

View attachment 93841

View attachment 93842

View attachment 93843
Sorry to bring up an old thread but is it possible that you can please make a drawing of these tools for me to make as a project? I'm looking for this specific design
 
Hi Henry,

Is it for a school project or the like? No drawings were made, just dimensioned sketches, which are long since gone. The tool holders were made to suit the dimensions of my lathe, so unless you have the same lathe and tools, the dimensions you need will be different. If you wish I can make a dimensioned sketch for you, a lot of the dimensions are not critical.

Take care Tony.
 
Here is a drawing of the "Norman Patent" tool post that I made some time ago ! This is the one that is in daily use today.
 

Attachments

  • Norman-001.jpeg
    Norman-001.jpeg
    211 KB · Views: 4
FYI.
I have American/Lantern tool post too in drawer for some types work. It is great for a few jobs very hand on that day.

Dave
 
This is the tool post from my 1909 Drummond round bed lathe, as you can see it is extremely robust but does require quite a lot of set up time. It is made from cast iron.
 

Attachments

  • TP (2).jpg
    TP (2).jpg
    288.2 KB · Views: 3
  • TP (1).jpg
    TP (1).jpg
    165.1 KB · Views: 2
Hi,

Nice work. Are the built to any specific print or are they constructed freelance?

Its freelance made to suit the lathe and tools.

Hi Ray,

Where can I find a tool bit holder like that here in the US?

If you mean the Tangential Tool it was supplied by Eccentric Engineering an Australian company which I believe has agents in the USA.

Hi Norm,

I like the two holes in the tool holder which really reduces the overhang of a lathe tool that can occur.

It is the first time I have done this and it seems to work well.

Regards Tony.
Hi The tangential tool holder was designed here in Melbourne Australia by an engineer many years ago. I personally have been using one for 40 years. worth every bit of cost in time saving. John
 
Hi John,

The tangential tool holder was designed here in Melbourne Australia by an engineer many years ago. I personally have been using one for 40 years. worth every bit of cost in time saving.

We must have bought them about the same time. A promotional video was sent to the model engineering society I belong to and as a apprentice I had been taught to hand turn metal I knew how versatile a graver shaped cutting tool could be. I ordered one directly from Australia, I think the company was called Burke but I might be wrong it is a long time, and I agree well worth the cost. I now have both left and right hand versions.

Take care Tony.
 

Latest posts

Back
Top