For Sale Frisco Standard Auction

GreenTwin · Apr 28, 2023

My wife would want me to stay far away from this auction.

I think they accept remote bids though.

Not in running condition, but I have seen much worse.

https://www.equipmentfacts.com/list.../1915-frisco-5hp-standard-marine-engine?lp=TH

GreenTwin · Apr 28, 2023

My guess is this will go for about $18,000.00.

Place your bets.

(It was junk, and went for $25.00, LOL).

.

stevehuckss396 · Apr 29, 2023

Why so much for an engine that's missing parts?

GreenTwin · Apr 29, 2023

Its a Frisco Standard; like finding snow in heck.

There are just a handful around.

Very nice side-shaft marine engine; considered one of the best by many.

Its pretty high on my list of engines to build.
I almost have the 3D model complete.

.

Richard Hed · Apr 29, 2023

GreenTwin said:
Its a Frisco Standard; like finding snow in heck.

There are just a handful around.

Very nice side-shaft marine engine; considered one of the best by many.

Its pretty high on my list of engines to build.
I almost have the 3D model complete.

.

View attachment 146530 View attachment 146531 View attachment 146532 View attachment 146533

So, you have 2D drawings for this?

Mousetrap · Apr 30, 2023

Richard Hed said:
So, you have 2D drawings for this?

Where is heck?

GreenTwin · Apr 30, 2023

Richard Hed said:
So, you have 2D drawings for this?

Its all on 3D at the moment, but I can drag and drop objects in Solidworks to create the 2D drawings, so no big deal.

.

GreenTwin · Apr 30, 2023

Mousetrap said:
Where is heck?

I guess euphemistically you could say that is where I live, but best not to get into politics.

I am debating on whether to try and remote bid on this item.

One the one hand, the engine may sell for less than I think it will sell for, and on the other hand my wife could potentially kill me if I purchased it.

I have visions of a 20 foot launch that this engine would fit nicely into.

If I had a boat like this, you would never see me on dry land again.

GreenTwin · Apr 30, 2023

Another one.

GreenTwin · Apr 30, 2023

Or perhaps a little micro tug.

GreenTwin · Apr 30, 2023

This is one of my favorite boats, but it would probably require a little more than 5 hp.

Jasonb · Apr 30, 2023

As Steve says seems a lot for what is there or where you thinking of using it as an anchor.

This one looks like it was better value

https://bid.aumannauctions.com/lot-details/index/catalog/22410/lot/3245413

GreenTwin · Apr 30, 2023

It is a little hard to tell what is missing.

Obviously the carb and plumbing are missing.

I can't tell if it has a piston and connecting rod.

Missing items will definitely affect the price, but the basics seem to be there, ie: the side shaft, gears, valves, etc.

If the piston and rod are included, just about any carb would work.

I am not sure about the gearbox.
It may or may not be missing some critical parts.

Based on the 5hp engine Jason posted, this engine may not go for very much.
(All the more reason to buy it, LOL).

If the piston and valves are all free and working, then restoration would be pretty simple in my opinion, but it would take some TLC to get it right.

It sort of looks like it has had a frozen water jacket crack repair job.

.

GreenTwin · Apr 30, 2023

Looking closely at the photos, it appears that the piston and connecting rod are missing.

That is not good.

It looks like the engine was a pile of parts, and they sort of roughly re-assembled it without fasteners.

So its not really what I woud call a siezed-up junk engine, but without that rod and piston, you would need to get creative about replacing those parts.

.

GreenTwin · Apr 30, 2023

Here is one running.

There is really not that much to them, although the side shaft and gears are somewhat complex.

GreenTwin · Apr 30, 2023

Another nice Frisco running:

marvin hedberg · Apr 30, 2023

my 5hp marine Frisco

GreenTwin · Apr 30, 2023

Marvin-

That is a magnificent Frisco Standard.

If you ever get tired of it, please PM me.

I definitely need one of these.

A model-sized build may be as close as I get to owning one, but I would be ok with that too.

Pat J

.

Jasonb · Apr 30, 2023

And pat may even offer you $17,999

They are quite an interesting engiene to watch running, a bit like a vertical version of the horizontal "halfbreeds" what still have their roots in steam engine design.

GreenTwin · Apr 30, 2023

Its just money, you can't take it with you.

Edit:

I could perhaps mount it in my pickup truck.
I am from the south you know.

(not my photo)

.

If you have bought, sold or gained information from our Classifieds, please donate to HomeModelEngineMachinist and give back.

For Sale Frisco Standard Auction

Help Support Home Model Engine Machinist Forum:

Well-Known Member

Well-Known Member

Model Engineer

Well-Known Member

Well-Known Member

Active Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Project of the Month Winner!!!

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Active Member

Attachments

Well-Known Member

Project of the Month Winner!!!

Well-Known Member

Similar threads

Join the conversation!

Join today and get all the highlights of this community direct to your inbox. It's FREE!