New UK member

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

CheshireAllan

Member
Joined
Mar 20, 2023
Messages
5
Reaction score
4
Location
Cheshire
Just thought I would say Hi 🙋‍♂️ I live in the middle of Cheshire in the UK, I have a small workshop in a British single garage, but I have squeezed in a Myford Super 7, Cormak MK25L mill, decent work bench with a big compressor under it, fabrication area with MIG and TIG, then the normal parts washer, shot blasting cabinet ect, so I can do most things, as for what I make, mostly new tools to make more tools 🤣
 
Welcome.

Those Myford 7's are the cat's meow in my opinion as far as a nice small lathe (everyone has their favorite lathe type, but I have always admired the Myford 7 series).

You got some engine build ideas in mind that you want to attempt? or have you already built some engines?

Glad to have you along for the ride.

Pat J
 
I do love my Myford :) at some point I want to get a bigger workshop, as I could really do with a bigger lathe for some of the bits I get asked to do, but will still keep the Myford and might even get it put in the ground with me lol.

I have started a horizontal engine a while ago, but lost momentum, as it was possibly stretching my skills at that point, but I do keep looking at it, and the plans are still on the bench lol

but most of the bits I make seem to be tools to make tools to do a job that someone askes me to make lol, saying that I am a full time carer to my wife and 2 kids with autism, so my workshop 2 days a week between school hours is my bit of sanity, and keeps the brain working, but it also means I am quite limited in how much I can get done each day :)
 
I find workshop time to be very relaxing, and it gives me something to focus on and forget all the problems of the world.

I have always dreamed of building engines too, since I was very young; I just love to think about engine designs.

I gave up on building engines for many years, but kept going back and trying, until I finally succeeded.
Never give up on the engine building dreams; at least that is my motto.

Good luck to you.
Patience and persistance does pay off in the end.

Pat J
 
Oh I never give up, I just have a rather long list of jobs to do, and things keep getting added and pushed to the top 🤣 but one day I will get there :)
 
Welcome to the forum !
Nice to have a new member.
Hope to see your project
 
Oh I never give up, I just have a rather long list of jobs to do, and things keep getting added and pushed to the top 🤣 but one day I will get there :)
Hi Allan,

I live in S Leicestershire. Welcome to this helpful forum. Your post above could have been written by most of us I suspect, certainly holds true for me,

Best regards

TerryD
 
Just thought I would say Hi 🙋‍♂️ I live in the middle of Cheshire in the UK, I have a small workshop in a British single garage, but I have squeezed in a Myford Super 7, Cormak MK25L mill, decent work bench with a big compressor under it, fabrication area with MIG and TIG, then the normal parts washer, shot blasting cabinet ect, so I can do most things, as for what I make, mostly new tools to make more tools 🤣
Welcome to the group

Dave
 
I do love my Myford :) at some point I want to get a bigger workshop, as I could really do with a bigger lathe for some of the bits I get asked to do, but will still keep the Myford and might even get it put in the ground with me lol.

I have started a horizontal engine a while ago, but lost momentum, as it was possibly stretching my skills at that point, but I do keep looking at it, and the plans are still on the bench lol

but most of the bits I make seem to be tools to make tools to do a job that someone askes me to make lol, saying that I am a full time carer to my wife and 2 kids with autism, so my workshop 2 days a week between school hours is my bit of sanity, and keeps the brain working, but it also means I am quite limited in how much I can get done each day :)
Yup, you get a good tool like lathe and mill then you makes tools to make more tools to make the tools to make the parts. We all do that too.
 

Latest posts

Back
Top