• If you have bought, sold or gained information from our Classifieds, please donate to HomeModelEngineMachinist and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

For Sale Vintage Stuart Turner D10 Steam Engine Single Cylinder Vertical Castings

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Hopsteiner

Well-Known Member
Joined
Feb 27, 2018
Messages
136
Reaction score
59
Location
Grand Rapids, Michigan
Looking to sell this vintage set of castings and prints for the construction of this working model steam or compressed air model. What you see is what you get. Screws and miscellaneous small parts as described in the instructions will need to be fabricated or bought. The prints and instructions have rust spotting on them but are readable. $135 plus shipping.
 

Attachments

  • 314FDC64-0B6E-4A0E-BB0C-848F83FA0BD4.jpeg
    314FDC64-0B6E-4A0E-BB0C-848F83FA0BD4.jpeg
    2.2 MB · Views: 8
  • 2054845A-6B74-42F1-B7FE-B5B7B47DA021.jpeg
    2054845A-6B74-42F1-B7FE-B5B7B47DA021.jpeg
    2.6 MB · Views: 4
  • E96451D8-8CCD-4855-8A21-7F33A71E783A.jpeg
    E96451D8-8CCD-4855-8A21-7F33A71E783A.jpeg
    2.5 MB · Views: 4
  • F1DDCB43-B32F-4330-B477-4CFA58CCDBDD.jpeg
    F1DDCB43-B32F-4330-B477-4CFA58CCDBDD.jpeg
    2.4 MB · Views: 4
  • 9447D6DC-5ED5-4740-9F0C-F5F0C3BB18A7.jpeg
    9447D6DC-5ED5-4740-9F0C-F5F0C3BB18A7.jpeg
    2.6 MB · Views: 4
  • CA363EF1-4CD7-4E38-9087-6E19F593D2AF.jpeg
    CA363EF1-4CD7-4E38-9087-6E19F593D2AF.jpeg
    2.4 MB · Views: 4
Charles, as I mentioned. There are items that need to be added. Castings, I‘m not sure. As to price, negotiable. Certainly didn’t mean to get anyones dander up.
 
Looking to sell this vintage set of castings and prints for the construction of this working model steam or compressed air model. What you see is what you get. Screws and miscellaneous small parts as described in the instructions will need to be fabricated or bought. The prints and instructions have rust spotting on them but are readable. $135 plus shipping.
It certainly looks like a 10V with only one upright and the single base etc. The whole kit is available new and complete from Stuart Models for £110.00 ($132.00 plus postage.

Edit,
Having looked closer There are quite a lot of parts (castings) missing as well as all of the stock materials and BA fasteners that are normally supplied with the kit. These will probably cost more than the kit. There are also duplicates of some of the instructions and drawings. The original instructions are basically a double sided A3 size print. Having just looked at the Stuart Models website the castings shown above would cost around $100 as spare parts (plus postage).

1676459164349.png


Regards
TerryD
 
Last edited:
The one piece box bed and soleplate is different from the two piece one that Stuarts do and the flywheel looks a bit thick in the spoke department so not sure if that is a Stuart Item either, same for the valve chest the Oval gland boss is round on the Stuart casting

Can you say if the castings are rusty iron or bronze/brass as there were some bronze lookalikes available a few years back that had the one piece bed/soleplate
 

Latest posts

Back
Top